Skip to the content
SMD-8P,2x2.5mm

SPL06-007

GoertekExtended

-40℃~+85℃ 0.2pa/K 1.7V~3.6V 1uA 30Kpa~1.1bar I2C、SpI Integrated ADC and digital interface、Standby mode、On-chip temperature output SMD-8P,2x2.5mm Pressure Sensors ROHS

Part id
goertek/SPL06-007
Category
Force Sensors
Package
SMD-8P,2x2.5mm
Pins
8
In stock
0 at JLCPCB (C233787)
Used on
2 open-source boards

Overview

The SPL06-007 is a force Sensor made by Goertek in a SMD-8P,2x2.5mm package with 8 pins. -40℃~+85℃ 0.2pa/K 1.7V~3.6V 1uA 30Kpa~1.1bar I2C、SpI Integrated ADC and digital interface、Standby mode、On-chip temperature output SMD-8P,2x2.5mm Pressure Sensors ROHS.

JLCPCB lists it (part C233787). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Open-source boards using it

2
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 4 layers65 × 40.1 mmAero Zero, the printed circuit board in 3D

    Aero Zero

    ChladpavPy/Aero-Zero

    I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…

    97 parts

Questions

What package is the SPL06-007?

SMD-8P,2x2.5mm, with 8 pins.

Where is the SPL06-007 datasheet?

Goertek publishes it: the Datasheet link on this page opens it.

Where can I order the SPL06-007?

JLCPCB lists it as part C233787, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the SPL06-007?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.