Skip to the content
123456789101112131415161718

SW-GPS01

G-NiceRFExtended

-147dBm -40℃~+85℃ 28s 30mA@3.3V 3V~3.5V 3m GPS、BDS、GLONASS UART - GNSS Modules ROHS

Part id
g-nicerf/SW-GPS01
Category
GNSS Modules
Pins
18
In stock
16 at JLCPCB (C3001508)
Used on
1 open-source board

Overview

The SW-GPS01 is a GNSS Module made by G-NiceRF with 18 pins. -147dBm -40℃~+85℃ 28s 30mA@3.3V 3V~3.5V 3m GPS、BDS、GLONASS UART - GNSS Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SW-GPS01, from EasyEDA) and its footprint (EasyEDA_Cloud:WIRELM-SMD_18P-L10.1-W9.9_P1.10-TL, from EasyEDA), ready for a KiCad board. 16 are in stock at JLCPCB (part C3001508). 1 open-source board in 1 repository on GitHub use it.

Symbol

1GND2TXD3RXD41PPS5EXT_INT06V_BCKP7VCC_IO8VCC9nRESET10GND11RF_IN12GND13ANT_ON14VCC_RF15NC16SDA17SCL18NC
EasyEDA_Cloud:SW-GPS01From EasyEDA

Footprint

123456789101112131415161718
EasyEDA_Cloud:WIRELM-SMD_18P-L10.1-W9.9_P1.10-TLFrom EasyEDA

Pinout

18
The pins of the SW-GPS01
PinNameType
1GNDUnspecified
2TXDUnspecified
3RXDUnspecified
41PPSUnspecified
5EXT_INT0Unspecified
6V_BCKPUnspecified
7VCC_IOUnspecified
8VCCUnspecified
9nRESETUnspecified
10GNDUnspecified
11RF_INUnspecified
12GNDUnspecified
13ANT_ONUnspecified
14VCC_RFUnspecified
15NCUnspecified
16SDAUnspecified
17SCLUnspecified
18NCUnspecified

Open-source boards using it

1
  • 4 layers65 × 59.5 mmGround station, the printed circuit board in 3D

    Ground station

    ShaneTWilliams/capstone

    Remotely-operated quadcopter hardware, firmware and software

    122 parts3

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the SW-GPS01?

Yes. The symbol is EasyEDA_Cloud:SW-GPS01 and the footprint EasyEDA_Cloud:WIRELM-SMD_18P-L10.1-W9.9_P1.10-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the SW-GPS01 datasheet?

G-NiceRF publishes it: the Datasheet link on this page opens it.

Where can I order the SW-GPS01?

JLCPCB lists it as part C3001508, with 16 in stock; the sellers' links on this page open their listings.

What can replace the SW-GPS01?

Parts like it in the library: the GPS01-TD by G-NiceRF and the GPS01-ZK by G-NiceRF. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SW-GPS01?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.