
PMOD differential driver
gabeak2/Differential-SPI-over-Ethernet
Board that natively plugs into PMOD 6x2 headers from Digilent FPGA boards, and converts it to 2 differential SPI channels sent out to RJ45 connectors for ethernet cables
EXAR
16Mbps ±15kV ESD-Protected, Half Duplex RS-485/RS422 Transceiver
The SP3078EEN-L is an uncategorised made by EXAR in a SOIC8 package with 8 pins. 16Mbps ±15kV ESD-Protected, Half Duplex RS-485/RS422 Transceiver.
PCBKit's library has its KiCad symbol (Analog & Interface:SP3078, from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | RO | Output |
| 2 | RE | Input |
| 3 | DE | Input |
| 4 | DI | Input |
| 5 | GND | Power in |
| 6 | A | Input/output |
| 7 | B | Input/output |
| 8 | VCC | Power in |

gabeak2/Differential-SPI-over-Ethernet
Board that natively plugs into PMOD 6x2 headers from Digilent FPGA boards, and converts it to 2 differential SPI channels sent out to RJ45 connectors for ethernet cables
Yes. The symbol is Analog & Interface:SP3078 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC8, with 8 pins. Its footprint is drawn on this page.
Parts like it in the library: the LTA8062XS8/R8 by Linearin, the SD8568 by WAVE, the FH9926 by XIN FEI HONG and the LTC8836XS8/R8 by Linearin. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.