
SG-310
Seiko Epson
Crystal Oscillator
- Part id
- epson/SG-310
- Category
- Uncategorised
- Pins
- 4
- Used on
- 1 open-source board
Overview
The SG-310 is an uncategorised made by Seiko Epson with 4 pins. Crystal Oscillator.
PCBKit's library has its KiCad symbol (Horizon_oscillator:SG-310, from Horizon) and its footprint (Horizon_manufacturer:SG-310, from Horizon), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
4| Pin | Name | Type |
|---|---|---|
| 1 | OE | Input |
| 2 | GND | Power in |
| 3 | OUT | Output |
| 4 | VCC | Power in |
Open-source boards using it
1- 2 layers54.9 × 40 mm

Parts like it
2Questions
Is there a KiCad symbol and footprint for the SG-310?
Yes. The symbol is Horizon_oscillator:SG-310 and the footprint Horizon_manufacturer:SG-310, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the SG-310?
Parts like it in the library: the SG-310SCF by Seiko Epson and the SG-310SCN-50.000MHZ by Seiko Epson. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SG-310?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.