FLEXYPIN
Efabless
- Part id
- efabless/FLEXYPIN
- Category
- Uncategorised
- Pins
- 112
Overview
The FLEXYPIN is an uncategorised made by Efabless with 56 pins.
PCBKit's library has its KiCad symbol (Caravel_breakout_flexypin:Caravel_breakout_flexypin, from Antmicro) and its footprint (flexypin-56-p1-27mm-caravel-breakout:Flexypin_56_P1.27mm_Caravel_Breakout, from Antmicro), ready for a KiCad board.
Symbol
Footprint
Pinout
56| Pin | Name | Type |
|---|---|---|
| 1 | IO37 | Input/output |
| 2 | IO36 | Input/output |
| 3 | IO35 | Input/output |
| 4 | IO34 | Input/output |
| 5 | GND | Power in |
| 6 | VCCD | Passive |
| 7 | VDDIO | Passive |
| 8 | GND | Passive |
| 9 | IO33 | Input/output |
| 10 | IO32 | Input/output |
| 11 | IO31 | Input/output |
| 12 | IO30 | Input/output |
| 13 | IO29 | Input/output |
| 14 | IO28 | Input/output |
| 15 | IO27 | Input/output |
| 16 | IO26 | Input/output |
| 17 | IO25 | Input/output |
| 18 | IO24 | Input/output |
| 19 | IO23 | Input/output |
| 20 | IO22 | Input/output |
| 21 | IO21 | Input/output |
| 22 | IO20 | Input/output |
| 23 | IO19 | Input/output |
| 24 | IO18 | Input/output |
| 25 | IO17 | Input/output |
| 26 | IO16 | Input/output |
| 27 | IO15 | Input/output |
| 28 | IO14 | Input/output |
| 29 | IO13 | Input/output |
| 30 | IO12 | Input/output |
| 31 | IO11 | Input/output |
| 32 | IO10 | Input/output |
| 33 | IO9 | Input/output |
| 34 | IO8 | Input/output |
| 35 | IO7 | Input/output |
| 36 | TX_IO6 | Input/output |
| 37 | RX_IO5 | Input/output |
| 38 | SCK_IO4 | Input/output |
| 39 | CS_IO3 | Input/output |
| 40 | SDI_IO2 | Input/output |
| 41 | SDO_IO1 | Input/output |
| 42 | IO0 | Input/output |
| 43 | VCCD1 | Power in |
| 44 | VDDA1 | Power in |
| 45 | VDDA | Power in |
| 46 | FLASH_SCK | Output |
| 47 | GPIO | Input/output |
| 48 | FLASH_D1 | Input/output |
| 49 | FLASH_D0 | Input/output |
| 50 | VCCD | Power in |
| 51 | FLASH_CS | Output |
| 52 | XCLK | Input |
| 53 | RST | Input |
| 54 | VDDA2 | Power in |
| 55 | VDDIO | Power in |
| 56 | VCCD2 | Power in |
Questions
Is there a KiCad symbol and footprint for the FLEXYPIN?
Yes. The symbol is Caravel_breakout_flexypin:Caravel_breakout_flexypin and the footprint flexypin-56-p1-27mm-caravel-breakout:Flexypin_56_P1.27mm_Caravel_Breakout, both drawn on this page. PCBKit places them on a board for you when you design with it.