2 layers115 × 100 mm
Cog1
diegodemarco/cog1
cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.
133 parts6MIT
SOD-80C
ZMM3.0
DIOTECExtended
-50℃~+175℃ 1 Independent 2.8V~3.2V 3V 4uA@1V 500mW SOD-80C Zener Diodes ROHS
- Part id
- diotec/ZMM3.0
- Category
- Zener Diodes
- Package
- SOD-80C
- Pins
- 5
- In stock
- 0 at JLCPCB (C3739101)
- Used on
- 2 open-source boards
Overview
The ZMM3.0 is a zener Diode made by DIOTEC in a SOD-80C package with 2 pins. -50℃~+175℃ 1 Independent 2.8V~3.2V 3V 4uA@1V 500mW SOD-80C Zener Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3739101). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | K | Passive |
| 2 | A | Passive |
Open-source boards using it
2- 2 layers120 × 94 mm
Aurelia robotics PCB
DanielCusi/MoonJelly-robotics-PCB
Robotics PCB designed for Eurobot used by Wolvineers.
270 partsCERN-OHL-W-2.0
Questions
Is there a KiCad symbol and footprint for the ZMM3.0?
Yes. The symbol is Device:D_Zener, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ZMM3.0?
SOD-80C, with 2 pins.
Where is the ZMM3.0 datasheet?
DIOTEC publishes it: the Datasheet link on this page opens it.
Where can I order the ZMM3.0?
JLCPCB lists it as part C3739101, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ZMM3.0?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.