
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
DIOTECExtended
12.5V 5.8V 5V TVS SOD-523 ESD and Surge Protection (TVS/ESD) ROHS
The ESD5B5V0WT is an ESD And Surge Protection made by DIOTEC in a SOD-523 package with 2 pins. 12.5V 5.8V 5V TVS SOD-523 ESD and Surge Protection (TVS/ESD) ROHS.
PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SOD-523, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5639145). 3 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Passive |
| 2 | A2 | Passive |

DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

czalinski/ThlHwTestDevices
KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.
Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SOD-523, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOD-523, with 2 pins. Its footprint is drawn on this page.
DIOTEC publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5639145, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the H3V3LD5B by hongjiacheng, the ESD5Z3V3 by MDD, the ESD5Z3.3T1G by TECH PUBLIC and the LESD5Z3.3T1G by Leshan Radio (LRC). Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.