Skip to the content
123

ZXCT1009FTA

Diodes IncorporatedExtended

-40℃~+85℃ 1 100nA 2.5V~20V 2.5V~20V 25mA 300kHz 4uA High-side detection ±2.5V SOT-23 Current Sense Amplifiers ROHS

Part id
diodes/ZXCT1009FTA
Category
Current Sense Amplifiers
Package
SOT-23
Pins
3
In stock
30,778 at JLCPCB (C83670)
Used on
8 open-source boards

Overview

The ZXCT1009FTA is a current Sense Amplifier made by Diodes Incorporated in a SOT-23 package with 3 pins. -40℃~+85℃ 1 100nA 2.5V~20V 2.5V~20V 25mA 300kHz 4uA High-side detection ±2.5V SOT-23 Current Sense Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Current:ZXCT1009F, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 30,778 are in stock at JLCPCB (part C83670). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

1Vs-2Vs+3Iout
Amplifier_Current:ZXCT1009FFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

7
Supply, least
2.5 V · VSENSE+, recommended operating, min · p. 2
Supply, most
20 V · VSENSE+, recommended operating, max · p. 2
Supply, absolute maximum
20 V · VSENSE+, relative to IOUT, absolute max · p. 2
Works from
-40 °C · operating ambient, min · p. 2
Works up to
85 °C · operating ambient, max · p. 2
Takes working
4 µA · quiescent, VSENSE = 0 V, VIN = 5 V, typical · p. 2
A pin gives at most
25 mA · IOUT, continuous output current, absolute max · p. 2

Pinout

3
The pins of the ZXCT1009FTA
PinNameType
1Vs-Input
2Vs+Input
3IoutOutput

Open-source boards using it

8
  • 2 layers20.3 × 69.7 mmPG attiny404, the printed circuit board in 3D

    PG attiny404

    fabiansteiner/OpenValve

    3D-printable pinch valve for irrigation and sensor-driven liquid control.

    41 parts276CERN-OHL-S-2.0
  • 2 layers60 × 55 mmEPS, the printed circuit board in 3D

    EPS

    AMSAT-EA/easat-2

    EASAT-2 satellite

    105 parts15
  • 2 layers99 × 91 mmWireCutter, the printed circuit board in 3D

    WireCutter

    hexeguitar/AutomatedWireCutter

    PSoC4 based automated wire cutter project

    204 parts3
  • 4 layers29 × 18 mmKD2 10, the printed circuit board in 3D

    KD2 10

    Reisi/The_Helen_Project

    The Helen Project is a firmware platform for bicycle lights. It features

    58 parts1BSD-2-Clause
  • 2 layers24 × 27.9 mmPowerFEC, the printed circuit board in 3D

    PowerFEC

    medo64/PowerFEC

    Non-isolated 5V output with a 500 mA current limit.

    28 partsMIT
  • 2 layers66 × 54 mmWindshield, the printed circuit board in 3D

    Windshield

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    86 parts208
  • 2 layers67.6 × 55.4 mmBreaker v2.0, the printed circuit board in 3D

    Breaker v2.0

    danielvilas/DigitalTrains

    Digital Trains

    34 partsMIT
  • 2 layers73 × 50 mmBreaker v3.0, the printed circuit board in 3D

    Breaker v3.0

    danielvilas/DigitalTrains

    Digital Trains

    31 partsMIT

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the ZXCT1009FTA?

Yes. The symbol is Amplifier_Current:ZXCT1009F and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ZXCT1009FTA?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the ZXCT1009FTA datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the ZXCT1009FTA?

JLCPCB lists it as part C83670, with 30,778 in stock; the sellers' links on this page open their listings.

What can replace the ZXCT1009FTA?

Parts like it in the library: the ZXCT1009QFTA by Diodes Incorporated, the ZXCT1008QFTA by Diodes Incorporated, the ZXCT1107SA by Diodes Incorporated and the ZXCT1109QSA by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ZXCT1009FTA?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.