
SDM2U30CSP
Diodes IncorporatedExtended
150uA@30V 2A 30V 480mV@2A X3-WLB1608-2 Schottky Diodes ROHS
- Part id
- diodes/SDM2U30CSP
- Category
- Schottky Diodes
- Package
- X3-WLB1608-2
- Pins
- 5
- In stock
- 25 at JLCPCB (C3001723)
- Used on
- 2 open-source boards
Overview
The SDM2U30CSP is a schottky Diode made by Diodes Incorporated in a X3-WLB1608-2 package with 2 pins. 150uA@30V 2A 30V 480mV@2A X3-WLB1608-2 Schottky Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (EasyEDA_Cloud:SMD-X3-WLB1608-2-SDM2U30CSP-7, from EasyEDA), ready for a KiCad board. 25 are in stock at JLCPCB (part C3001723). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
6- Reverse voltage, most
- 30 V · maximum peak repetitive reverse voltage · p. 2
- Forward current, most
- 2 A · maximum average rectified output current at TA = +25°C · p. 2
- Forward voltage
- 380 mV · typical forward voltage at IF = 1.0A · p. 2
- Forward voltage
- 450 mV · typical forward voltage at IF = 2.0A · p. 2
- Junction, hottest
- 150 °C · maximum operating junction temperature · p. 2
- Junction to air (X3-WLB1608-2)
- 155 K/W · typical junction to ambient, FR-4 PCB, 2oz. copper, minimum recommended pad layout · p. 2
What it is and has
2- Package
- X3-WLB1608-2 · p. 1
- Moisture Sensitivity
- Level 1 per J-STD-020 · p. 1
Specifications
10| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Peak Repetitive Reverse Voltage VRRM | TA = +25°C, unless otherwise specified | max 30 V | 2 |
| Average Rectified Output Current IO | TA = +25°C; single phase, half wave, 60Hz, resistive or inductive load; for capacitive load, derate current by 20% | max 2 A | 2 |
| Repetitive Peak Forward Current IFRM | TA = +25°C; Pulse Wave = 1 Sec, Duty Cycle = 66% | max 4.2 A | 2 |
| Non-Repetitive Peak Forward Surge Current 8.3ms IFSM | TA = +25°C; Single Half Sine Wave Superimposed on Rated Load | max 28 A | 2 |
| Typical Thermal Resistance Junction to Ambient (Note 5) RθJA | X3-WLB1608-2; device mounted on FR-4 PCB, 2oz. Copper, minimum recommended pad layout | typ 155 °C/W | 2 |
| Operating and Storage Temperature Range TJ, TSTG | min -55 · max 150 °C | 2 | |
| Forward Voltage Drop VF | TA = +25°C; IF = 1.0A | typ 0.38 · max 0.42 V | 2 |
| Forward Voltage Drop VF | TA = +25°C; IF = 2.0A | typ 0.45 · max 0.48 V | 2 |
| Reverse Current (Note 6) IR | TA = +25°C; VR = 30V; short duration pulse test used to minimize self-heating effect | max 150 uA | 2 |
| Junction Capacitance CJ | TA = +25°C; VR = 4V, f = 1.0MHz | typ 110 pF | 2 |
Ordering codes, by the datasheet
2- SDM2U30CSP-7B
- X3-WLB1608-2 · 10,000 per Tape & Reel; carrier tape with 2mm pocket-to-pocket pitch · p. 1
- SDM2U30CSP-7
- X3-WLB1608-2 · 5,000 per Tape & Reel; carrier tape with 4mm pocket-to-pocket pitch · p. 1
Open-source boards using it
2- 2 layers27 × 27 mm

- 4 layers27 × 27 mm

O32controller
qwertpas/O32controller
Miniature closed-loop controller for brushless DC motors
88 parts37MIT
Parts like it
1Questions
Is there a KiCad symbol and footprint for the SDM2U30CSP?
Yes. The symbol is Device:D_Schottky and the footprint EasyEDA_Cloud:SMD-X3-WLB1608-2-SDM2U30CSP-7, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SDM2U30CSP?
X3-WLB1608-2, with 2 pins. Its footprint is drawn on this page.
Where is the SDM2U30CSP datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the SDM2U30CSP?
JLCPCB lists it as part C3001723, with 25 in stock; the sellers' links on this page open their listings.
What can replace the SDM2U30CSP?
Parts like it in the library: the SDM2U40CSP-7B by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SDM2U30CSP?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.