
PAM2306AYPAA
Diodes IncorporatedExtended
-40℃~+125℃ 1.2V、1.5V、1.8V、2.5V、2.8V、3.3V 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable and Fixed Buck Built-in Overcurrent Protection、Light load efficient mode、Load disconnect、Cycle-by-cycle current limiting Step-down type Yes WDFN-12-EP(3x3) DC-DC Converters ROHS
- Part id
- diodes/PAM2306AYPAA
- Category
- DC DC Converters
- Package
- WDFN-12-EP(3x3)
- Pins
- 13
- In stock
- 0 at JLCPCB (C2071134)
- Used on
- 4 open-source boards
Overview
The PAM2306AYPAA is a DC DC Converter made by Diodes Incorporated in a WDFN-12-EP(3x3) package with 13 pins. -40℃~+125℃ 1.2V、1.5V、1.8V、2.5V、2.8V、3.3V 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable and Fixed Buck Built-in Overcurrent Protection、Light load efficient mode、Load disconnect、Cycle-by-cycle current limiting Step-down type Yes WDFN-12-EP(3x3) DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:PAM2306AYPAA, from KiCad's library) and its footprint (Package_DFN_QFN:WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2071134). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
13| Pin | Name | Type |
|---|---|---|
| 1 | VIN2 | Power in |
| 2 | LX2 | Output |
| 3 | GND | Power in |
| 4 | FB1 | Input |
| 5 | NC1 | Not connected |
| 6 | EN1 | Input |
| 7 | VIN1 | Power in |
| 8 | LX1 | Output |
| 9 | GND | Passive |
| 10 | FB2 | Input |
| 11 | NC2 | Not connected |
| 12 | EN2 | Input |
| 13 | GND | Passive |
Open-source boards using it
4- 4 layers86 × 56 mm

- 2 layers13.5 × 18 mm

Pam2306 breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
15 parts253GPL-3.0 - 4 layers75 × 65 mm

CRImier MyKiCad vaio re
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
289 parts1 - 4 layers100 × 85 mm

Parts like it
3PAM2306DYPAA
WDFN-12L-EP(3x3)-40℃~+125℃ 1.5MHz 1A 2 2.5V~5.5V 40uA Buck Buck Built-in WDFN-12L-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersPAM2306AYPKE
WDFN-12L-EP(3x3)-40℃~+85℃ 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable Buck Buck Built-in Yes WDFN-12L-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersPAM2306AYPCB
WDFN-12-EP(3x3)-40℃~+85℃@(TA) 1.5MHz 1A 2 2.5V~5.5V Buck Buck Built-in Fixed Yes WDFN-12-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the PAM2306AYPAA?
Yes. The symbol is Regulator_Switching:PAM2306AYPAA and the footprint Package_DFN_QFN:WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PAM2306AYPAA?
WDFN-12-EP(3x3), with 13 pins. Its footprint is drawn on this page.
Where is the PAM2306AYPAA datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the PAM2306AYPAA?
JLCPCB lists it as part C2071134, with 0 in stock; the sellers' links on this page open their listings.
What can replace the PAM2306AYPAA?
Parts like it in the library: the PAM2306DYPAA by Diodes Incorporated, the PAM2306AYPKE by Diodes Incorporated and the PAM2306AYPCB by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PAM2306AYPAA?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.