Skip to the content
123456

AP61302Z6

Diodes IncorporatedExtended

-40℃~+125℃@(TJ) 1 19uA 2.2MHz 2.4V~5.5V 3A 600mV~3.6V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHS

Part id
diodes/AP61302Z6
Category
DC DC Converters
Package
SOT-563
Pins
6
In stock
686 at JLCPCB (C3193204)
Used on
3 open-source boards

Overview

The AP61302Z6 is a DC DC Converter made by Diodes Incorporated in a SOT-563 package with 6 pins. -40℃~+125℃@(TJ) 1 19uA 2.2MHz 2.4V~5.5V 3A 600mV~3.6V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:AP61302Z6, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-563, from KiCad's library), ready for a KiCad board. 686 are in stock at JLCPCB (part C3193204). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1FB2GND3VIN4SW5EN6PG
Regulator_Switching:AP61302Z6From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-563From KiCad's library

From the datasheet

17
Supply, least
2.4 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6.5 V · VIN, DC absolute max · p. 4
Supply, absolute maximum
7 V · VIN, 400ms absolute max · p. 4
Works from
-40 °C · Operating ambient min · p. 4
Works up to
85 °C · Operating ambient max · p. 4
Junction, hottest
160 °C · Junction temperature absolute max · p. 4
Takes working
19 µA · Quiescent supply current typical, PFM, no load and non-switching · p. 13
Takes working
690 µA · Quiescent supply current typical, PWM, VFB = 0.65V · p. 5
Takes asleep
100 nA · Shutdown supply current typical, VEN = 0V · p. 5
Gives
3 A · Continuous output current max · p. 1
Current limit
5.5 A · HS peak current limit typical, source to drain · p. 5
Current limit
3.2 A · LS valley current limit typical, source to drain · p. 5
Feedback reference
600 mV · Feedback voltage typical, CCM · p. 5
Switches at
2.2 MHz · Oscillator frequency typical, VIN = 5V, VOUT = 1.8V, CCM · p. 5
Junction to air (SOT563)
141 K/W · Junction to ambient rating, two-layer FR-4 PCB, 2oz copper · p. 4
Junction to case (SOT563)
33 K/W · Junction to case rating · p. 4

What it is and has

14
Input voltage
2.4V to 5.5V · p. 1
Adjustable output voltage
0.6V to 3.6V · p. 1
Continuous output current
3A · p. 1
Reference voltage
0.6V ± 2% · p. 1
Switching frequency
2.2MHz at VIN = 5V, VOUT = 1.8V · p. 1
Operation mode selection
Programmable through EN · p. 1
Low-dropout mode
Supported · p. 1
Power-good indicator
Open-drain output · p. 14
Protection
Undervoltage lockout · p. 1
Protection
VIN overvoltage protection · p. 1
Protection
Peak current limit · p. 1
Protection
Valley current limit · p. 1
Protection
Thermal shutdown · p. 1
Package
SOT563 · p. 1

Around it

8
cap 10µF or greater
between VIN and GND; Ceramic input capacitor; place as closely across VIN and GND as possible. · p. 17
cap 22µF
between VOUT and GND; Total output capacitance for most applications; ceramic, low ESR; place close to GND. · p. 17
ind 0.47µH to 2.2µH
between SW and VOUT; Select DC current rating at least 35% above maximum load current and DC resistance below 30mΩ for highest efficiency; place close to SW. · p. 16
ind 1.0 µH
between SW and VOUT; L, recommended selection for 1.8 V output. · p. 16
cap 22 µF
between VIN and GND; C1, recommended selection for 1.8 V output. · p. 16
res 200.0 kΩ
between VOUT and FB; R1, recommended feedback divider for 1.8 V output; place close to FB. · p. 16
res 100.0 kΩ
between FB and GND; R2, recommended feedback divider for 1.8 V output; place close to FB. · p. 16
cap 33 pF
between VOUT and FB; C3, AP61302 recommended selection for 1.8 V output, across R1. · p. 16

Specifications

45
ParameterConditionsAs printedPage
Supply Pin Voltage VINDC; TA = +25°Cmin -0.3 · max 6.5 V4
Supply Pin Voltage VIN400ms; TA = +25°Cmin -0.3 · max 7 V4
Feedback Pin Voltage VFBUpper limit VIN + 0.3 Vmin -0.3 V4
Switch Pin Voltage VSWDC; upper limit VIN + 0.3 Vmin -1 V4
Switch Pin Voltage VSW20ns; upper limit VIN + 2.0 Vmin -2.5 V4
Enable Pin Voltage VENUpper limit VIN + 0.3 Vmin -0.3 V4
Power-Good Pin Voltage VPGAP61302; DCmin -0.3 · max 6 V4
Storage Temperature TSTmin -65 · max 150 °C4
Junction Temperature TJmax 160 °C4
Lead Temperature TLmax 260 °C4
Human Body Model HBM±6000 V ratingmax 6000 V4
Charged Device Model CDM±2000 V ratingmax 2000 V4
Junction to Ambient θJASOT563; FR-4 substrate, two-layer PCB, 2oz copper, minimum recommended pad layoutmax 141 °C/W4
Junction to Case θJCSOT563; FR-4 substrate, two-layer PCB, 2oz copper, minimum recommended pad layoutmax 33 °C/W4
Supply Voltage VINTA = +25°C unless otherwise specifiedmin 2.4 · max 5.5 V4
Output Voltage VOUTTA = +25°C unless otherwise specifiedmin 0.6 · max 3.6 V4
Operating Ambient Temperature TAmin -40 · max 85 °C4
Operating Junction Temperature TJmin -40 · max 125 °C4
Shutdown Supply Current ISHDNVEN = 0V; VIN = 5V; TJ = +25°Ctyp 0.1 uA5
Quiescent Supply Current IQPFM, VFB = 0.65V; VIN = 5V; TJ = +25°Ctyp 19 uA5
Quiescent Supply Current IQPWM, VFB = 0.65V; VIN = 5V; TJ = +25°Ctyp 690 uA5
VIN Power-On Reset Rising Threshold PORtyp 2.3 · max 2.4 V5
VIN Undervoltage Lockout Falling Threshold UVLOtyp 2.2 V5
VIN Overvoltage Rising Threshold OVPVINtyp 6.3 V5
VIN Overvoltage Hysteresis OVPVIN_HYStyp 300 mV5
High-Side Power MOSFET On-Resistance (Note 8) RDS(ON)1typ 70 mΩ5
Low-Side Power MOSFET On-Resistance (Note 8) RDS(ON)2typ 50 mΩ5
HS Peak Current Limit (Note 8) IPEAK_LIMITFrom Source to Drainmin 3.5 · typ 5.5 A5
LS Valley Current Limit (Note 8) IVALLEY_LIMITFrom Source to Draintyp 3.2 A5
Oscillator Frequency fSWVOUT = 1.8V, CCM; VIN = 5Vtyp 2.2 MHz5
Minimum On-Time tON_MINtyp 70 ns5
Minimum Off-Time tOFF_MINtyp 70 ns5
Feedback Voltage VFBCCMmin 0.588 · typ 0.6 · max 0.612 V5
EN Logic-High Threshold VEN_Htyp 0.91 V5
EN Logic-Low Threshold VEN_Ltyp 0.83 V5
Soft-Start Time tSStyp 0.5 ms5
Undervoltage Falling Threshold PGUV_FALLAP61302, Percent of Output Regulation, Faulttyp 90 %5
Undervoltage Rising Threshold PGUV_RISEAP61302, Percent of Output Regulation, Goodtyp 95 %5
Overvoltage Rising Threshold PGOV_RISEAP61302, Percent of Output Regulation, Faulttyp 110 %5
Overvoltage Falling Threshold PGOV_FALLAP61302, Percent of Output Regulation, Goodtyp 105 %5
Power-Good Rise Delay Time tPG_RDAP61302typ 40 us5
Power-Good Output Logic Low VPG_OLAP61302, IPG = -1mAmax 0.4 V5
Power-Good Pullup Resistor RPGAP61302typ 5 MΩ5
Thermal Shutdown (Note 8) TSDtyp 160 °C5
Thermal Shutdown Hysteresis (Note 8) THystyp 30 °C5

Open-source boards using it

3
  • 4 layers100 × 60 mmNuku carrier template basic, the printed circuit board in 3D

    Nuku carrier template basic

    nanovoltio/nuku-carrier-template

    What is this? An FPGA platform carrier for ants?

    91 parts
  • 4 layers30 × 48 mmMy first pcb, the printed circuit board in 3D

    My first pcb

    VictorManuel-Bautista/my-first-pcb

    Project developed in Windows 11. Not considered WSL during the following steps.

    54 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP61302Z6?

Yes. The symbol is Regulator_Switching:AP61302Z6 and the footprint Package_TO_SOT_SMD:SOT-563, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP61302Z6?

SOT-563, with 6 pins. Its footprint is drawn on this page.

Where is the AP61302Z6 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP61302Z6?

JLCPCB lists it as part C3193204, with 686 in stock; the sellers' links on this page open their listings.

What can replace the AP61302Z6?

Parts like it in the library: the TPS61023DRL by Texas Instruments, the TPS564247DRL by Texas Instruments, the TLV62585PDRL by Texas Instruments and the TPS563203DRL by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP61302Z6?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.