2 layers127 × 69.9 mm
Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
MP107-E
CTS Electronic ComponentsExtended
-40℃~+85℃ 10.738635MHz 30Ω 32pF ±30ppm ±50ppm HC-49U Crystals ROHS
- Part id
- cts/MP107-E
- Category
- Crystals
- Package
- HC-49U
- Pins
- 2
- In stock
- 0 at JLCPCB (C1669663)
- Used on
- 2 open-source boards
Overview
The MP107-E is a crystal made by CTS Electronic Components in a HC-49U package with 2 pins. -40℃~+85℃ 10.738635MHz 30Ω 32pF ±30ppm ±50ppm HC-49U Crystals ROHS.
PCBKit's library has its KiCad symbol (Device:Crystal, from KiCad's library) and its footprint (Crystal:Crystal_HC49-U_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1669663). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Passive |
| 2 | 2 | Passive |
Open-source boards using it
2- 4 layers160 × 68.2 mm
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the MP107-E?
Yes. The symbol is Device:Crystal and the footprint Crystal:Crystal_HC49-U_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MP107-E?
HC-49U, with 2 pins. Its footprint is drawn on this page.
Where is the MP107-E datasheet?
CTS Electronic Components publishes it: the Datasheet link on this page opens it.
Where can I order the MP107-E?
JLCPCB lists it as part C1669663, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MP107-E?
Parts like it in the library: the ECS-107.3-S-4X by ECS. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MP107-E?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.