
FPGA Pre Test
bsiyoung/FPGA_Pre_Test
Testing power rails and oscillator waveforms for FPGA use.
CTS Electronic ComponentsExtended
-55℃~+85℃ 100mA 2,000 cycles 20V 4 Gull Wing SPST Slide, Rocked SMD DIP Switches ROHS
The 219-4MST is a DIP Switche made by CTS Electronic Components in a SMD package with 8 pins. -55℃~+85℃ 100mA 2,000 cycles 20V 4 Gull Wing SPST Slide, Rocked SMD DIP Switches ROHS.
PCBKit's library has its KiCad symbol (Switches:SW 4x SPST DIP Switch, from CERN's library) and its footprint (Switches:SW_CTS_219-4MST, from CERN's library), ready for a KiCad board. 48 are in stock at JLCPCB (part C2842669). 4 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Input/output |
| 2 | 2 | Input/output |
| 3 | 3 | Input/output |
| 4 | 4 | Input/output |
| 5 | 5 | Input/output |
| 6 | 6 | Input/output |
| 7 | 7 | Input/output |
| 8 | 8 | Input/output |

bsiyoung/FPGA_Pre_Test
Testing power rails and oscillator waveforms for FPGA use.


Immortals-Robotics/MainBoard
Immortals main electronics for the Robocup Soccer Small-Size League

OE1KHZ/SlidersOfSociety-PCB
A CANbus controlled closed loop motor fader module based on Microchip's PIC18F25K83
Yes. The symbol is Switches:SW 4x SPST DIP Switch and the footprint Switches:SW_CTS_219-4MST, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD, with 8 pins. Its footprint is drawn on this page.
CTS Electronic Components publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2842669, with 48 in stock; the sellers' links on this page open their listings.
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.