Skip to the content
123

KTM1301SA-TO3

CONNTEKExtended

-40℃~+125℃ 1.8V~5.5V 160nA 3.1mT~4.1mT 4mT~5mT 50Hz 5mA 9Gs Omnipolar Push-pull Reverse voltage protection、Current limit protection、Short-Circuit Protection TO-92S Hall Switches ROHS

Part id
conntek/KTM1301SA-TO3
Category
Linear Hall Sensors
Package
TO-92S
Pins
5
In stock
0 at JLCPCB (C20623401)

Overview

The KTM1301SA-TO3 is a linear Hall Sensor made by CONNTEK in a TO-92S package with 5 pins. -40℃~+125℃ 1.8V~5.5V 160nA 3.1mT~4.1mT 4mT~5mT 50Hz 5mA 9Gs Omnipolar Push-pull Reverse voltage protection、Current limit protection、Short-Circuit Protection TO-92S Hall Switches ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:TO-92S-3_L4.1-W1.7-P1.27-L, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C20623401).

Symbol

The library has no symbol for this part yet.

Footprint

123
EasyEDA_Cloud:TO-92S-3_L4.1-W1.7-P1.27-LFrom EasyEDA

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the KTM1301SA-TO3?

Yes. the footprint EasyEDA_Cloud:TO-92S-3_L4.1-W1.7-P1.27-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the KTM1301SA-TO3?

TO-92S, with 5 pins. Its footprint is drawn on this page.

Where is the KTM1301SA-TO3 datasheet?

CONNTEK publishes it: the Datasheet link on this page opens it.

Where can I order the KTM1301SA-TO3?

JLCPCB lists it as part C20623401, with 0 in stock; the sellers' links on this page open their listings.

What can replace the KTM1301SA-TO3?

Parts like it in the library: the A1223LUA-T by Allegro MicroSystems, LLC, the CC6105TO by Cross chip, the KTM1301SC-TO3 by CONNTEK and the A1122LUA-T by Allegro MicroSystems, LLC. Check their datasheets: a part that fits the footprint may still differ in its ratings.