Skip to the content
123

MJE2955

Jiangsu Changjing Electronics Technology (CJ)Extended

-55℃~+150℃ 1 PNP 10A 1mA 20 2MHz 2W 5V 60V 8V PNP TO-220-3L Bipolar (BJT) ROHS

Part id
cj/MJE2955
Category
Bipolar (BJT)
Package
TO-220-3L
Pins
3
In stock
63 at JLCPCB (C78883)
Used on
4 open-source boards

Overview

The MJE2955 is a bipolar made by Jiangsu Changjing Electronics Technology (CJ) in a TO-220-3L package with 3 pins. -55℃~+150℃ 1 PNP 10A 1mA 20 2MHz 2W 5V 60V 8V PNP TO-220-3L Bipolar (BJT) ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PNP_1B_2C_3E, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 63 are in stock at JLCPCB (part C78883). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PNP_1B_2C_3EFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the MJE2955
PinNameType
1BInput
2CPassive
3EPassive

Open-source boards using it

4
  • 2 layers88.8 × 76 mmArch Bridge, the printed circuit board in 3D

    Arch Bridge

    SeraphimlabsLLC/Arch_Bridge

    DCC-EX to Loconet accessory bus interface

    102 parts2AGPL-3.0
  • 2 layers83.1 × 40.6 mm12v autocut charger, the printed circuit board in 3D

    12v autocut charger

    ANSHUMANDOCX/AutoCut-Charger

    Its a Autocut charger to charge a 12v Lead Acid Battery

    23 parts
  • 2 layers301.9 × 194.8 mmTRS80 Model I EI RevD, the printed circuit board in 3D

    TRS80 Model I EI RevD

    RetroStack/TRS-80-Model-I-Expansion-Interface-Rev-D

    Hardware Replica of the TRS-80 Model I Expansion Interface - Revision D

    185 partsMIT
  • 2 layers143.5 × 71.5 mmAudio receiver, the printed circuit board in 3D

    Audio receiver

    whatwareweb/audio-receiver

    OSHW audio reciever and amplifier

    74 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MJE2955?

Yes. The symbol is Pinmap_Generic:Q_PNP_1B_2C_3E and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MJE2955?

TO-220-3L, with 3 pins. Its footprint is drawn on this page.

Where is the MJE2955 datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the MJE2955?

JLCPCB lists it as part C78883, with 63 in stock; the sellers' links on this page open their listings.

What can replace the MJE2955?

Parts like it in the library: the TIP147 by Jiangsu Changjing Electronics Technology (CJ), the JMSH1509AC-U by Jiangsu JieJie Microelectronics, the SL44H11 by Slkor and the BD911 by SPTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MJE2955?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.