Skip to the content
123

CJ3401

Jiangsu Changjing Electronics Technology (CJ)Extended

1 P-Channel 1.3V 115pF 30V 350mW 4.2A 77pF 954pF P-Channel SOT-23 MOSFETs ROHS

Part id
cj/CJ3401
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
118,058 at JLCPCB (C13799)
Used on
8 open-source boards

Overview

The CJ3401 is a MOSFET made by Jiangsu Changjing Electronics Technology (CJ) in a SOT-23 package with 3 pins. 1 P-Channel 1.3V 115pF 30V 350mW 4.2A 77pF 954pF P-Channel SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 118,058 are in stock at JLCPCB (part C13799). 8 open-source boards in 5 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the CJ3401
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

8
  • 2 layers49 × 25 mmSlimeVR Tracker, the printed circuit board in 3D

    SlimeVR Tracker

    CoreanXka/SlimeVR-Tracker

    基于上述原因,诞生了这个项目,解决了上面的问题,并具有以下特点: - 超小尺寸,超高集成度,仅比开发板长1mm。 - 整合接口,仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口,锂电池不再直连3.3V引脚,而是会先经过降压芯片降压后输出。 - 智能切换供电,在有外部USB供电的情况下会切断锂电池供电并进行充电,断开供电后自动使用锂电池供电。 -…

    40 parts6GPL-3.0
  • 4 layers75 × 136 mmMynd Main, the printed circuit board in 3D

    Mynd Main

    Prototype-Fund-Hardware/MYND-Hardware

    Inofficial hardware repository for the Teufel MYND loudspeaker: https://teufel.de/mynd-107002004

    561 parts3
  • 2 layers90 × 8 mmLED Assy, the printed circuit board in 3D

    LED Assy

    SATXcircuitmakers/UniversalBadge

    27 parts
  • 2 layers68.6 × 46 mmGoodTorch, the printed circuit board in 3D

    GoodTorch

    ShrinathN/GoodTorch

    An STM32G0 based torch for a 20W LED

    106 parts
  • 2 layers66.7 × 121 mmBsidesDSM26, the printed circuit board in 3D

    BsidesDSM26

    wrickert/UntitledElectronics

    99 parts8
  • 4 layers55 × 41 mmMynd BT, the printed circuit board in 3D

    Mynd BT

    Prototype-Fund-Hardware/MYND-Hardware

    Inofficial hardware repository for the Teufel MYND loudspeaker: https://teufel.de/mynd-107002004

    136 parts3
  • 2 layers116 × 26 mmMynd UI, the printed circuit board in 3D

    Mynd UI

    Prototype-Fund-Hardware/MYND-Hardware

    Inofficial hardware repository for the Teufel MYND loudspeaker: https://teufel.de/mynd-107002004

    82 parts3
  • 2 layers90 × 80.5 mmUniversalBadge, the printed circuit board in 3D

    UniversalBadge

    SATXcircuitmakers/UniversalBadge

    26 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CJ3401?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CJ3401?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the CJ3401 datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the CJ3401?

JLCPCB lists it as part C13799, with 118,058 in stock; the sellers' links on this page open their listings.

What can replace the CJ3401?

Parts like it in the library: the AO3400 by GOODWORK, the AO3400A by Alpha & Omega Semiconductor, the AO3400A by UMW and the AO3401A by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CJ3401?

8 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.