Skip to the content
123456789101112

E01-ML01DP5

Chengdu Ebyte Elec TechExtended

-40℃~+85℃ -96dBm 130mA 2.4GHz 2.5km 20dBm 20mA 2V~3.6V GFSK SPI Support adaptive frequency hopping Plugin RF Modules ROHS

Part id
chengdu-ebyte-elec-tech/E01-ML01DP5
Category
RF Modules
Package
插件
Pins
12
In stock
134 at JLCPCB (C97339)
Used on
5 open-source boards

Overview

The E01-ML01DP5 is a RF Module made by Chengdu Ebyte Elec Tech in a 插件 package with 12 pins. -40℃~+85℃ -96dBm 130mA 2.4GHz 2.5km 20dBm 20mA 2V~3.6V GFSK SPI Support adaptive frequency hopping Plugin RF Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:E01-2G4M27D, from EasyEDA) and its footprint (EasyEDA_Cloud:WIRELM-TH_E01-ML01DP5, from EasyEDA), ready for a KiCad board. 134 are in stock at JLCPCB (part C97339). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1GND2VCC3CE4CSN5SCK6MOSI7MISO8IRQ99101011111212
EasyEDA_Cloud:E01-2G4M27DFrom EasyEDA

Footprint

123456789101112
EasyEDA_Cloud:WIRELM-TH_E01-ML01DP5From EasyEDA

Pinout

12
The pins of the E01-ML01DP5
PinNameType
1GNDUnspecified
2VCCUnspecified
3CEUnspecified
4CSNUnspecified
5SCKUnspecified
6MOSIUnspecified
7MISOUnspecified
8IRQUnspecified
99Unspecified
1010Unspecified
1111Unspecified
1212Unspecified

Open-source boards using it

5
  • 2 layers32.3 × 52.5 mmTrain, the printed circuit board in 3D

    Train

    fkwilken/524_train_hacking

    The ESP32 code is built using platformio. Get the VS Code extension or install it and use: - pio run to build - pio run -t upload to upload

    3 parts1
  • 2 layers66 × 133.4 mm1001016-001-10-01 PinJammer V01, the printed circuit board in 3D

    1001016-001-10-01 PinJammer V01

    pinqin/PinJammerV01

    This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.

    72 parts
  • 2 layers55.5 × 65.5 mmMain Computer, the printed circuit board in 3D

    Main Computer

    UofA-BAJA/2024-2025-Firmware

    The software behind the electrical system in Baja Wildcat Racing.

    10 parts6
  • 2 layers55.5 × 65.5 mmPit Radio, the printed circuit board in 3D

    Pit Radio

    UofA-BAJA/2024-2025-Firmware

    The software behind the electrical system in Baja Wildcat Racing.

    8 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the E01-ML01DP5?

Yes. The symbol is EasyEDA_Cloud:E01-2G4M27D and the footprint EasyEDA_Cloud:WIRELM-TH_E01-ML01DP5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the E01-ML01DP5?

插件, with 12 pins. Its footprint is drawn on this page.

Where is the E01-ML01DP5 datasheet?

Chengdu Ebyte Elec Tech publishes it: the Datasheet link on this page opens it.

Where can I order the E01-ML01DP5?

JLCPCB lists it as part C97339, with 134 in stock; the sellers' links on this page open their listings.

What can replace the E01-ML01DP5?

Parts like it in the library: the NF-03 by Ai-Thinker, the DL-BK24K6 RX by DreamLNK, the DL-BK24K6 TX by DreamLNK and the E01-ML01S by Chengdu Ebyte Elec Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the E01-ML01DP5?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.