QPLL V1.3
CERN
Quartz Crystal Based Phase-Locked Loop (QPLL) for Jitter Filtering Application in LHC
- Part id
- cern/QPLL V1.3
- Category
- Uncategorised
- Package
- QFN28
- Pins
- 29
Overview
The QPLL V1.3 is an uncategorised made by CERN in a QFN28 package with 29 pins. Quartz Crystal Based Phase-Locked Loop (QPLL) for Jitter Filtering Application in LHC.
PCBKit's library has its KiCad symbol (Analog & Interface:CERN_QPLL_V1.3, from CERN's library) and its footprint (ICs And Semiconductors SMD:ASAT_LPCC-28, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | INLVDS- | Input |
| 2 | INLVDS+ | Input |
| 3 | INCMOS | Input |
| 4 | EXT.CONTROL | Input |
| 5 | A.RESTART/f0SELECT<4> | Input |
| 6 | RESET/f0SELECT<5> | Input |
| 7 | f0SELECT<3> | Input |
| 8 | ERROR | Output |
| 9 | LOCKED | Output |
| 10 | GND | Power in |
| 11 | VDD | Power in |
| 12 | LVDS80MHZ- | Output |
| 13 | LVDS80MHZ+ | Output |
| 14 | f0SELECT<2> | Input |
| 15 | LVDS160MHZ- | Output |
| 16 | LVDS160MHZ+ | Output |
| 17 | GND | Power in |
| 18 | VDD | Power in |
| 19 | LVDS40MHZ- | Output |
| 20 | LVDS40MHZ+ | Output |
| 21 | f0SELECT<1> | Input |
| 22 | VDD | Power in |
| 23 | CAP | Power in |
| 24 | XTAL1 | Passive |
| 25 | GND | Power in |
| 26 | XTAL2 | Passive |
| 27 | MODE | Input |
| 28 | f0SELECT<0> | Input |
| 29 | EP | Power in |
Questions
Is there a KiCad symbol and footprint for the QPLL V1.3?
Yes. The symbol is Analog & Interface:CERN_QPLL_V1.3 and the footprint ICs And Semiconductors SMD:ASAT_LPCC-28, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the QPLL V1.3?
QFN28, with 29 pins. Its footprint is drawn on this page.