GAN_CONTROLLER_V2.1
CERN
IC REG CTRLR BUCK 32QFN. Version 2.1. PWM signal removed and SW clamp added in a separate pin
- Part id
- cern/GAN_CONTROLLER_V2.1
- Category
- Uncategorised
- Package
- QFN33
- Pins
- 33
Overview
The GAN_CONTROLLER_V2.1 is an uncategorised made by CERN in a QFN33 package with 33 pins. IC REG CTRLR BUCK 32QFN. Version 2.1. PWM signal removed and SW clamp added in a separate pin.
PCBKit's library has its KiCad symbol (Analog & Interface:CERN_GAN_CONTROLLER_V2.1, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P500X500X90-33N-S360, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
33| Pin | Name | Type |
|---|---|---|
| 1 | EN_LinReg5V | Passive |
| 2 | EN_LinReg12V | Passive |
| 3 | EN_Buck | Passive |
| 4 | PGOOD | Passive |
| 5 | GND | Power in |
| 6 | RF | Passive |
| 7 | R_delayLS | Passive |
| 8 | R_delayHS | Passive |
| 9 | PTAT | Passive |
| 10 | 5V_12V_EPC | Passive |
| 11 | Vi | Passive |
| 12 | Vout_S | Passive |
| 13 | Vout | Passive |
| 14 | BGP_EA | Passive |
| 15 | Vdd_D | Passive |
| 16 | GND | Power in |
| 17 | EN_PRED | Passive |
| 18 | DIS_EXT_DELAY | Passive |
| 19 | INV_ENABLE | Passive |
| 20 | PWM_LS | Passive |
| 21 | PWM_HS | Passive |
| 22 | GND | Power in |
| 23 | SW | Passive |
| 24 | SW_Clamp | Passive |
| 25 | DiodeA | Passive |
| 26 | DiodeK | Passive |
| 27 | VDD5V | Power in |
| 28 | VDD12V | Power in |
| 29 | VIN_CTRL | Passive |
| 30 | FB_LIN | Passive |
| 31 | OUT_LIN | Passive |
| 32 | VIN48V | Power in |
| 33 | EP | Power in |
Questions
Is there a KiCad symbol and footprint for the GAN_CONTROLLER_V2.1?
Yes. The symbol is Analog & Interface:CERN_GAN_CONTROLLER_V2.1 and the footprint ICs And Semiconductors SMD:QFN50P500X500X90-33N-S360, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the GAN_CONTROLLER_V2.1?
QFN33, with 33 pins. Its footprint is drawn on this page.