Skip to the content
1111

CT3151SP-0

Cal TestExtended

- Banana Connectors / Alligator Clips ROHS

Part id
cal-test/CT3151SP-0
Category
Banana Connectors, Alligator Clips
Pins
4
In stock
0 at JLCPCB (C4993400)
Used on
8 open-source boards

Overview

The CT3151SP-0 is a banana Connectors, Alligator Clip made by Cal Test with 1 pins. - Banana Connectors / Alligator Clips ROHS.

PCBKit's library has its KiCad symbol (Connector_Generic:Conn_01x01, from KiCad's library) and its footprint (Connector:CalTest_CT3151, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C4993400). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1
Connector_Generic:Conn_01x01From KiCad's library

Footprint

1111
Connector:CalTest_CT3151From KiCad's library

Pinout

1
The pins of the CT3151SP-0
PinNameType
1Pin_1Passive

Open-source boards using it

8
  • 2 layers60 × 39 mmPcb adr1399-vref, the printed circuit board in 3D

    Pcb adr1399-vref

    Atmelfan/pcb-adr1399-vref

    A simple ADR1399/LM399 voltage reference

    18 parts1
  • 4 layers98.8 × 51.1 mmLDO Stable JAFWAK, the printed circuit board in 3D

    LDO Stable JAFWAK

    admiralento/loopgaingang

    Bringup for custom LDO design in TSMC180

    87 parts
  • 4 layers100 × 100 mmLDO pcb, the printed circuit board in 3D

    LDO pcb

    kthomas18/LDO-pcb

    79 parts
  • 4 layers57.5 × 30.5 mmSwitched R Load Bank, the printed circuit board in 3D

    Switched R Load Bank

    admiralento/loopgaingang

    Bringup for custom LDO design in TSMC180

    28 parts
  • 2 layers127 × 104.1 mmTEST HARNESS, the printed circuit board in 3D

    TEST HARNESS

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    38 partsMIT
  • 4 layers141.8 × 140.7 mmFull bridge CSI, the printed circuit board in 3D

    Full bridge CSI

    ssyhy9-Hongyu/MS_Thesis_PCB

    PCB version control for current source inverter project

    69 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CT3151SP-0?

Yes. The symbol is Connector_Generic:Conn_01x01 and the footprint Connector:CalTest_CT3151, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the CT3151SP-0 datasheet?

Cal Test publishes it: the Datasheet link on this page opens it.

Where can I order the CT3151SP-0?

JLCPCB lists it as part C4993400, with 0 in stock; the sellers' links on this page open their listings.

What can replace the CT3151SP-0?

Parts like it in the library: the CT3151SP-2 by Cal Test, the CT3151SP-6 by Cal Test, the CT3151SP-9 by Cal Test and the CT3151-2 by Cal Test. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CT3151SP-0?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.