2 layers160 × 67 mm
FT800Q-R
BridgetekExtended
-40℃~+85℃ 1.8V~3.3V 30Mbps Controller I2C、Serial VQFN-48(7x7) Video Interface ICs ROHS
- Part id
- bridgetek/FT800Q-R
- Category
- Video Interface ICs
- Package
- VQFN-48(7x7)
- Pins
- 49
- In stock
- 3 at JLCPCB (C3824106)
- Used on
- 1 open-source board
Overview
The FT800Q-R is a video Interface IC made by Bridgetek in a VQFN-48(7x7) package with 49 pins. -40℃~+85℃ 1.8V~3.3V 30Mbps Controller I2C、Serial VQFN-48(7x7) Video Interface ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:FT800Q-R, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-48_L7.0-W7.0-P0.50-BL-EP5.2, from EasyEDA), ready for a KiCad board. 3 are in stock at JLCPCB (part C3824106). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | AUDIO_L | Unspecified |
| 2 | GND | Unspecified |
| 3 | SPI_SCLK/I2C_SCL | Unspecified |
| 4 | MISO/I2C_SDA | Unspecified |
| 5 | MOSI/I2C_SA0 | Unspecified |
| 6 | CS_N/I2C_SA1 | Unspecified |
| 7 | GPIO0/I2C_SA2 | Unspecified |
| 8 | GPIO1 | Unspecified |
| 9 | VCCIO | Unspecified |
| 10 | MODE | Unspecified |
| 11 | INT_N | Unspecified |
| 12 | PD_N | Unspecified |
| 13 | X1/CLK | Unspecified |
| 14 | X2 | Unspecified |
| 15 | GND | Unspecified |
| 16 | VCC | Unspecified |
| 17 | VCC1V2 | Unspecified |
| 18 | VCC | Unspecified |
| 19 | X+ | Unspecified |
| 20 | Y+ | Unspecified |
| 21 | X- | Unspecified |
| 22 | Y- | Unspecified |
| 23 | GND | Unspecified |
| 24 | BACKLIGHT | Unspecified |
| 25 | DE | Unspecified |
| 26 | VSYNC | Unspecified |
| 27 | HSYNC | Unspecified |
| 28 | DISP | Unspecified |
| 29 | PCLK | Unspecified |
| 30 | B7 | Unspecified |
| 31 | B6 | Unspecified |
| 32 | B5 | Unspecified |
| 33 | B4 | Unspecified |
| 34 | B3 | Unspecified |
| 35 | B2 | Unspecified |
| 36 | GND | Unspecified |
| 37 | G7 | Unspecified |
| 38 | G6 | Unspecified |
| 39 | G5 | Unspecified |
| 40 | G4 | Unspecified |
| 41 | G3 | Unspecified |
| 42 | G2 | Unspecified |
| 43 | R7 | Unspecified |
| 44 | R6 | Unspecified |
| 45 | R5 | Unspecified |
| 46 | R4 | Unspecified |
| 47 | R3 | Unspecified |
| 48 | R2 | Unspecified |
| 49 | GND | Unspecified |
Open-source boards using it
1Parts like it
3
TW9910-NA2-GR
QFN-48-EP(7x7)1.8V、3.3V Anti-aliasing / reconstruction filter、Built-in phase-locked loop、Video format detection、Programmable gain amplifier Decoder I2C QFN-48-EP(7x7) Video Interface ICs ROHSRenesas ElectronicsVideo Interface ICsTW9910-NA2-GRT
QFN-48-EP(7x7)1.8V、3.3V Anti-aliasing / reconstruction filter、Built-in phase-locked loop、Video format detection、Programmable gain amplifier Decoder I2C QFN-48-EP(7x7) Video Interface ICs ROHSRenesas ElectronicsVideo Interface ICsTW9910-NB2-GRT
QFN-48-EP(7x7)1.8V、3.3V Decoder QFN-48-EP(7x7) Video Interface ICs ROHSRenesas ElectronicsVideo Interface ICs
Questions
Is there a KiCad symbol and footprint for the FT800Q-R?
Yes. The symbol is EasyEDA_Cloud:FT800Q-R and the footprint EasyEDA_Cloud:QFN-48_L7.0-W7.0-P0.50-BL-EP5.2, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FT800Q-R?
VQFN-48(7x7), with 49 pins. Its footprint is drawn on this page.
Where is the FT800Q-R datasheet?
Bridgetek publishes it: the Datasheet link on this page opens it.
Where can I order the FT800Q-R?
JLCPCB lists it as part C3824106, with 3 in stock; the sellers' links on this page open their listings.
What can replace the FT800Q-R?
Parts like it in the library: the TW9910-NA2-GR by Renesas Electronics, the TW9910-NA2-GRT by Renesas Electronics and the TW9910-NB2-GRT by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the FT800Q-R?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.