Skip to the content
1234

CD-MMBL110S

BournsExtended

-65℃~+150℃ 1.1V@1.0A 1A 1kV 30A 5uA Single-Phase Rectifier DFN3538-4 Bridge Rectifiers ROHS

Part id
bourns/CD-MMBL110S
Category
Bridge Rectifiers
Package
DFN3538-4
Pins
4
In stock
4 at JLCPCB (C3151657)
Used on
5 open-source boards

Overview

The CD-MMBL110S is a bridge Rectifier made by Bourns in a DFN3538-4 package with 4 pins. -65℃~+150℃ 1.1V@1.0A 1A 1kV 30A 5uA Single-Phase Rectifier DFN3538-4 Bridge Rectifiers ROHS.

PCBKit's library has its KiCad symbol (CD-MMBL110S:CD-MMBL110S, from Antmicro) and its footprint (dfn3538:DFN3538, from Antmicro), ready for a KiCad board. 4 are in stock at JLCPCB (part C3151657). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1234
CD-MMBL110S:CD-MMBL110SFrom Antmicro

Footprint

1234
dfn3538:DFN3538From Antmicro

From the datasheet

7
Reverse voltage, most
1 kV · max repetitive peak reverse voltage · p. 1
Forward current, most
1 A · max average forward rectified current at TA = 55 °C · p. 1
Junction, hottest
150 °C · max operating junction temperature · p. 1
Forward voltage
900 mV · typical instantaneous forward voltage at IF = 0.4 A · p. 1
Forward voltage
1.1 V · max instantaneous forward voltage at IF = 1.0 A · p. 1
Junction to air (DFN3538)
130 K/W · typical junction to air, PCB copper pad areas 1.3 mm x 1.3 mm · p. 1
Junction to case (DFN3538)
40 K/W · typical junction to case, PCB copper pad areas 1.3 mm x 1.3 mm · p. 1

What it is and has

4
Rating
1000 V / 1 A · p. 1
Package
DFN3538 · p. 3
Profile
1.15 mm · p. 1
Compliance
RoHS and Halogen Free · p. 1

Specifications

12
ParameterConditionsAs printedPage
Maximum Repetitive Peak Reverse Voltage VRRMTA = 25 °Cmax 1000 V1
Maximum Average Forward Rectified Current (TA = 55 °C) IF(AV)TA = 55 °Cmax 1 A1
Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSMTA = 25 °C; 8.3 ms single half sine-wave superimposed on rated load, JEDEC methodmax 30 A1
Operating Temperature Range TJmin -55 · max 150 °C1
Storage Temperature Range TSTGmin -55 · max 150 °C1
Instantaneous Forward Voltage VFIF = 0.4 A; TA = 25 °Ctyp 0.9 · max 1 V1
Instantaneous Forward Voltage VFIF = 1.0 A; TA = 25 °Cmax 1.1 V1
Repetitive Peak Reverse Current IRRMVR = VRRM; TA = +25 °Ctyp 0.08 · max 5 uA1
Repetitive Peak Reverse Current IRRMVR = VRRM; TA = +125 °Cmax 100 uA1
Junction Capacitance CJVR = 4 V, f = 1.0 MHz; TA = 25 °Ctyp 9 pF1
Thermal Resistance, Junction to Air1 RΘJADFN3538; measured mounted on PCB with 1.3 mm x 1.3 mm (0.05 inch x 0.05 inch) copper pad areastyp 130 °C / W1
Thermal Resistance, Junction to Case1 RΘJCDFN3538; measured mounted on PCB with 1.3 mm x 1.3 mm (0.05 inch x 0.05 inch) copper pad areastyp 40 °C / W1

Ordering codes, by the datasheet

2
CD-MMBL110S
DFN3538 · 13-inch reel; 5,000 per reel · p. 4
CD-MMBL110S-H
DFN3538 · 7-inch reel; 1,400 per reel · p. 4

Open-source boards using it

5
  • 8 layers120 × 60 mmJetson orin baseboard, the printed circuit board in 3D

    Jetson orin baseboard

    antmicro/jetson-orin-baseboard

    Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX

    681 parts305Apache-2.0
  • 10 layers120 × 120 mmK410t devboard, the printed circuit board in 3D

    K410t devboard

    antmicro/kintex-410t-devboard

    This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.

    1,020 parts46Apache-2.0
  • 6 layers107 × 68 mmCm4-baseboard, the printed circuit board in 3D

    Cm4-baseboard

    antmicro/cm4-baseboard

    Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout

    516 parts36Apache-2.0
  • 12 layers152.9 × 90 mmData center rdimm ddr4-tester, the printed circuit board in 3D

    Data center rdimm ddr4-tester

    antmicro/rdimm-ddr4-tester

    Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.

    691 parts32Apache-2.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the CD-MMBL110S?

Yes. The symbol is CD-MMBL110S:CD-MMBL110S and the footprint dfn3538:DFN3538, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CD-MMBL110S?

DFN3538-4, with 4 pins. Its footprint is drawn on this page.

Where is the CD-MMBL110S datasheet?

Bourns publishes it: the Datasheet link on this page opens it.

Where can I order the CD-MMBL110S?

JLCPCB lists it as part C3151657, with 4 in stock; the sellers' links on this page open their listings.

What can replace the CD-MMBL110S?

Parts like it in the library: the CD-MMBL110S-H by Bourns. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CD-MMBL110S?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.