BNO055
Bosch
- Part id
- bosch/BNO055
- Category
- Uncategorised
- Pins
- 28
Overview
The BNO055 is an uncategorised made by Bosch with 28 pins.
PCBKit's library has its KiCad symbol (Sensor_Motion:BNO055, from KiCad's library) and its footprint (Package_LGA:LGA-28_5.2x3.8mm_P0.5mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | PIN1 | Not connected |
| 2 | GND | Power in |
| 3 | VDD | Power in |
| 4 | BOOT_LOAD_PIN | Input |
| 5 | PS1 | Input |
| 6 | PS0 | Input |
| 7 | PIN7 | Not connected |
| 8 | PIN8 | Not connected |
| 9 | CAP | Passive |
| 10 | BL_IND | Output |
| 11 | RESET | Input |
| 12 | PIN12 | Not connected |
| 13 | PIN13 | Not connected |
| 14 | INT | Output |
| 15 | PIN15 | Not connected |
| 16 | PIN16 | Not connected |
| 17 | COM3 | Input |
| 18 | COM2 | Passive |
| 19 | COM1 | Input/output |
| 20 | COM0 | Input/output |
| 21 | PIN21 | Not connected |
| 22 | PIN22 | Not connected |
| 23 | PIN23 | Not connected |
| 24 | PIN24 | Not connected |
| 25 | GNDIO | Power in |
| 26 | XOUT32 | Output |
| 27 | XIN32 | Input |
| 28 | VDDIO | Power in |
Parts like it
4
Questions
Is there a KiCad symbol and footprint for the BNO055?
Yes. The symbol is Sensor_Motion:BNO055 and the footprint Package_LGA:LGA-28_5.2x3.8mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the BNO055?
Parts like it in the library: the BNO08X by CEVA, the BC833M-P by Fanstel, the S15454-01WT by HAMAMATSU and the HT32F67593 by Holtek Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.