
PMP41115
Tim4769/usb-c-pd31-epr-charger
KiCad hardware, firmware artifacts, and validation notes for a bidirectional USB-C PD 3.1 EPR buck-boost charger targeting 240 W.
APVExtended
10uH 11A 15A 16.5mΩ Molded inductor ±20% SMD,13.5x12.8mm Molding Power Inductors ROHS
The APH1265T100M is a power Inductor made by APV in a SMD,13.5x12.8mm package with 2 pins. 10uH 11A 15A 16.5mΩ Molded inductor ±20% SMD,13.5x12.8mm Molding Power Inductors ROHS.
PCBKit's library has its KiCad symbol (Device:L, from KiCad's library) and its footprint (Inductor_SMD:L_APV_APH1265, from KiCad's library), ready for a KiCad board. 2,802 are in stock at JLCPCB (part C5349630). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Passive |
| 2 | 2 | Passive |

Tim4769/usb-c-pd31-epr-charger
KiCad hardware, firmware artifacts, and validation notes for a bidirectional USB-C PD 3.1 EPR buck-boost charger targeting 240 W.
Yes. The symbol is Device:L and the footprint Inductor_SMD:L_APV_APH1265, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD,13.5x12.8mm, with 2 pins. Its footprint is drawn on this page.
APV publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5349630, with 2,802 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SMMS1770-100M by SXN, the SLB1890P100MTT by Sunltech Tech, the TMPA1265SP-100MN-D by TA-I Tech and the FXL1365-100-M by cjiang. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.