Skip to the content

MYRA-231F1F08

Antmicro

Part id
antmicro/MYRA-231F1F08
Category
Uncategorised
Pins
64
Used on
1 open-source board

Overview

The MYRA-231F1F08 is an uncategorised made by Antmicro with 64 pins.

PCBKit's library has its KiCad symbol (MYRA-231F1F08:MYRA-231F1F08, from Antmicro) and its footprint (lga-64-11-4x11-4mm-myra:LGA-64_11.4x11.4mm_Myra, from Antmicro), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.

Symbol

A3MPA8FTDI_RESETA9VBUSA12USB_D_NA13USB_D_PA15CBUS2A16CBUS1B17SWDIO-JTMSC17SWCLK-JTCKD17NRSTE1CLK_ENF17+3V3H1SPI_CS3H17I2C1_SDAI1SPI_CS2I17I2C1_SCLJ1SPI2_MOSIK1SPI2_SCKL1SPI2_MISOL17VBATTN17GPIO_PC10O17GPIO_PC12P17GPIO_PC11Q7I2C2_SDAQ8I2C2_SCLQ11USB_MCU_NQ12USB_MCU_PQ14LD2Q17GND
MYRA-231F1F08:MYRA-231F1F08From Antmicro

Footprint

lga-64-11-4x11-4mm-myra:LGA-64_11.4x11.4mm_MyraFrom Antmicro

Pinout

64
The pins of the MYRA-231F1F08
PinNameType
A1MPPassive
A2MPPassive
A3MPPassive
A4MPPassive
A5MPPassive
A6MPPassive
A7GNDPassive
A8FTDI_RESETPassive
A9VBUSPower in
A10VBUSPassive
A11GNDPassive
A12USB_D_NInput/output
A13USB_D_PInput/output
A14GNDPassive
A15CBUS2Input/output
A16CBUS1Input/output
A17GNDPassive
B1MPPassive
B17SWDIO-JTMSInput/output
C1MPPassive
C17SWCLK-JTCKInput
D1GNDPassive
D17NRSTPassive
E1CLK_ENPassive
E17GNDPassive
F1GNDPassive
F17+3V3Power out
G1GNDPassive
G17GNDPassive
H1SPI_CS3Output
H17I2C1_SDAOpen collector
I1SPI_CS2Output
I17I2C1_SCLOpen collector
J1SPI2_MOSIInput/output
J17GNDPassive
K1SPI2_SCKInput/output
K17GNDPassive
L1SPI2_MISOInput/output
L17VBATTPower in
M1GNDPassive
M17GNDPassive
N1—Not connected
N17GPIO_PC10Input/output
O1—Not connected
O17GPIO_PC12Input/output
P1—Not connected
P17GPIO_PC11Input/output
Q1—Not connected
Q2—Not connected
Q3—Not connected
Q4—Not connected
Q5GNDPassive
Q6+3V3Passive
Q7I2C2_SDAOpen collector
Q8I2C2_SCLOpen collector
Q9GNDPassive
Q10GNDPassive
Q11USB_MCU_NInput/output
Q12USB_MCU_PInput/output
Q13GNDPassive
Q14LD2Output
Q15GNDPassive
Q16GNDPassive
Q17GNDPower in

Open-source boards using it

1
  • 4 layers50 × 26.5 mmEnvironment sensor sip baseboard, the printed circuit board in 3D

    Environment sensor sip baseboard

    antmicro/environment-sensor-myra-baseboard

    This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.

    59 parts3Apache-2.0

Questions

Is there a KiCad symbol and footprint for the MYRA-231F1F08?

Yes. The symbol is MYRA-231F1F08:MYRA-231F1F08 and the footprint lga-64-11-4x11-4mm-myra:LGA-64_11.4x11.4mm_Myra, both drawn on this page. PCBKit places them on a board for you when you design with it.

Which open-source boards use the MYRA-231F1F08?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.