Skip to the content
DO-204AC(DO-15)

SA6.5CA

amsemExtended

Part id
amsem/SA6.5CA
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-204AC(DO-15)
Pins
2
In stock
303 at JLCPCB (C7466190)
Used on
1 open-source board

Overview

The SA6.5CA is an ESD And Surge Protection made by amsem in a DO-204AC(DO-15) package with 2 pins.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library), ready for a KiCad board. 303 are in stock at JLCPCB (part C7466190). 1 open-source board in 1 repository on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Pinout

2
The pins of the SA6.5CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

1
  • 2 layers160 × 95 mmPlaca Control Fuentes y Carga, the printed circuit board in 3D

    Placa Control Fuentes y Carga

    edgranzella/Placa-de-Corte-TX

    Circuito Impreso de la plaquetita de Corte TX que va apilada sobre el Arduino Nano de la placa Controladora de Fuentes y Carga.

    142 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SA6.5CA?

Yes. The symbol is Device:D_TVS, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SA6.5CA?

DO-204AC(DO-15), with 2 pins.

Where is the SA6.5CA datasheet?

amsem publishes it: the Datasheet link on this page opens it.

Where can I order the SA6.5CA?

JLCPCB lists it as part C7466190, with 303 in stock; the sellers' links on this page open their listings.

What can replace the SA6.5CA?

Parts like it in the library: the SMBJ6.5CA by hongjiacheng, the SMF6.5CA by hongjiacheng, the SMAJ6.5CA by Brightking and the SMF6.5CA by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SA6.5CA?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.