Skip to the content
12345678910111213141516

ESP-07S

Ai-ThinkerExtended

-40℃~+125℃ -98dBm 19.5dBm 2.4GHz 3.3V 802.11b/g/n、BLE5.0 ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、I2C、HSPI、I2S SMD,17x16mm WiFi Modules ROHS

Part id
ai-thinker/ESP-07S
Category
WiFi Modules
Package
SMD,17x16mm
Pins
16
In stock
5,750 at JLCPCB (C82895)
Used on
10 open-source boards

Overview

The ESP-07S is a wiFi Module made by Ai-Thinker in a SMD,17x16mm package with 16 pins. -40℃~+125℃ -98dBm 19.5dBm 2.4GHz 3.3V 802.11b/g/n、BLE5.0 ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、I2C、HSPI、I2S SMD,17x16mm WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (RF_Module:ESP-07, from KiCad's library) and its footprint (RF_Module:ESP-07, from KiCad's library), ready for a KiCad board. 5,750 are in stock at JLCPCB (part C82895). 10 open-source boards in 7 repositories on GitHub use it.

Symbol

1RST2ADC3EN4GPIO165GPIO146GPIO127GPIO138VCC9GND10GPIO1511GPIO212GPIO013GPIO414GPIO515GPIO3/RXD16GPIO1/TXD
RF_Module:ESP-07From KiCad's library

Footprint

12345678910111213141516
RF_Module:ESP-07From KiCad's library

From the datasheet

10
Supply, least
2.7 V · VDD, recommended operating, min · p. 9
Supply, most
3.6 V · VDD, recommended operating, max · p. 9
Works from
-20 °C · operating ambient temperature, min · p. 9
Works up to
85 °C · operating ambient temperature, max · p. 9
Takes working
56 mA · Rx 802.11g, 1024 bytes, -70 dBm, 3.3 V, 25°C, typical · p. 11
Takes at most
170 mA · Tx 802.11b, 11 Mbps, +17 dBm, 50% duty cycle, 3.3 V, typical · p. 11
Takes asleep
20 mA · modem-sleep, typical · p. 11
Takes asleep
2 mA · light-sleep, DTIM3, 300 ms asleep and 3 ms receiving beacons, typical average · p. 12
Takes asleep
20 µA · deep-sleep, 2.5 V, typical · p. 11
Takes asleep
500 nA · power off, typical · p. 11

Open-source boards using it

10See all 10
  • 2 layers40 × 65 mmP-1000072 Cicada Wi Fi, the printed circuit board in 3D

    P-1000072 Cicada Wi Fi

    EnAccess/Cicada-WiFi-HW

    IoT Communications Module for Energy Access. A quick way to get production ready, bi-directional communications for your IoT embedded device.

    68 partsMIT
  • 2 layers136 × 130 mmLora nodemcu, the printed circuit board in 3D

    Lora nodemcu

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    52 parts1.1k
  • 2 layers22 × 38.5 mmArlecFanESP, the printed circuit board in 3D

    ArlecFanESP

    rmounce/ArlecFanESP-PCB

    6 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESP-07S?

Yes. The symbol is RF_Module:ESP-07 and the footprint RF_Module:ESP-07, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP-07S?

SMD,17x16mm, with 16 pins. Its footprint is drawn on this page.

Where is the ESP-07S datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the ESP-07S?

JLCPCB lists it as part C82895, with 5,750 in stock; the sellers' links on this page open their listings.

What can replace the ESP-07S?

Parts like it in the library: the ESP-07 by Ai-Thinker, the ESP32-WROOM-32E-N4 by Espressif Systems, the ESP-12F(ESP8266MOD) by Ai-Thinker and the ESP32-WROOM-32 by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP-07S?

10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.