
LTC6957IMS-3
Analog Devices
Low Phase Noise, Dual Output Buffer/Driver/Logic Converter, CMOS Logic, In-Phase Outputs
- Part id
- adi/LTC6957IMS-3
- Category
- Uncategorised
- Package
- MSOP12
- Pins
- 12
- Used on
- 2 open-source boards
Overview
The LTC6957IMS-3 is an uncategorised made by Analog Devices in a MSOP12 package with 12 pins. Low Phase Noise, Dual Output Buffer/Driver/Logic Converter, CMOS Logic, In-Phase Outputs.
PCBKit's library has its KiCad symbol (Interface:LTC6957xMS-3, from KiCad's library) and its footprint (Package_SO:MSOP-12_3x4.039mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
12| Pin | Name | Type |
|---|---|---|
| 1 | FILTA | Input |
| 2 | V+ | Power in |
| 3 | IN+ | Input |
| 4 | IN- | Input |
| 5 | GND | Power in |
| 6 | FILTB | Input |
| 7 | SD2 | Input |
| 8 | GNDOUT | Output |
| 9 | OUT2 | Output |
| 10 | OUT1 | Output |
| 11 | VDD | Power in |
| 12 | SD1 | Input |
Open-source boards using it
2- 4 layers56.3 × 45.9 mm

- 4 layers45 × 27.5 mm

Parts like it
4LTC2461CMS#PBF
MSOP-120℃~+70℃ 1 16 1LSB 2.7V~5.5V 200nA 2ppm/℃ 60Hz 60Hz Built-in Built-in I2C No Not supported Sigma-Delta MSOP-12 Analog to Digital Converters (ADC) ROHSAnalog DevicesUncategorisedLTC2644IMS-L10#PBF
MSOP-12-40℃~+85℃ 10 2 2.5LSB 2.7V~5.5V 2.7mA 25kHz 8us Power-on reset、Power-down mode、Built-in reference source Voltage Buffer MSOP-12 Digital to Analog Converters (DAC) ROHSAnalog DevicesUncategorisedLTC2644IMS-L12#PBF
MSOP-12-40℃~+85℃ 12 2 2.5LSB 2.7V~5.5V 500nA 6.25kHz 8us Integrated buffer、Power-on reset、Power-down mode、Programmable gain、Built-in reference source Voltage Buffer MSOP-12 Digital to Analog Converters (DAC) ROHSAnalog DevicesUncategorisedLTC6957IMS-2
MSOP12Low Phase Noise, Dual Output Buffer/Driver/Logic Converter, LVDS Logic OutputsAnalog DevicesUncategorised
Questions
Is there a KiCad symbol and footprint for the LTC6957IMS-3?
Yes. The symbol is Interface:LTC6957xMS-3 and the footprint Package_SO:MSOP-12_3x4.039mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LTC6957IMS-3?
MSOP12, with 12 pins. Its footprint is drawn on this page.
What can replace the LTC6957IMS-3?
Parts like it in the library: the LTC2461CMS#PBF by Analog Devices, the LTC2644IMS-L10#PBF by Analog Devices, the LTC2644IMS-L12#PBF by Analog Devices and the LTC6957IMS-2 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LTC6957IMS-3?
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.