2 layers
LTC4151IMS
Analog DevicesExtended
MSOP-10 Supervisor and Reset ICs
- Part id
- adi/LTC4151IMS
- Category
- Supervisor And Reset ICs
- Package
- MSOP-10
- Pins
- 10
- In stock
- 0 at JLCPCB (C7456504)
- Used on
- 5 open-source boards
Overview
The LTC4151IMS is a supervisor And Reset IC made by Analog Devices in a MSOP-10 package with 10 pins. MSOP-10 Supervisor and Reset ICs.
PCBKit's library has its KiCad symbol (Sensor_Energy:LTC4151xMS, from KiCad's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C7456504). 5 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | SENSE+ | Input |
| 2 | VIN | Power in |
| 3 | ADR1 | Input |
| 4 | ADR0 | Input |
| 5 | ADIN | Input |
| 6 | SCL | Input |
| 7 | SDA | Input/output |
| 8 | SHDN | Input |
| 9 | GND | Power in |
| 10 | SENSE- | Input |
Open-source boards using it
5- 2 layers134.6 × 109.2 mm
PacMan
Lafayette-FSAE/PacMan
A KiCad Schematic for PacMan, a Accumulator Management Board for the Lafayette FSAE Accumulator Management System
169 parts1 - 2 layers86.6 × 50 mm
- 2 layers29.2 × 16.5 mm
Current voltage sensor
MedadRufus/MastersProject
This project does data analysis of parameters from an E bike, in order to do accurate range estimations.
11 parts2MIT - 2 layers
Parts like it
8
TPS2490DGSR
MSOP-10-40℃~+85℃ 9V~80V Overcurrent Protection、Operating status indication、Adjustable current limiting、Protection latch MSOP-10 Power Distribution Switches ROHSTexas InstrumentsSupervisor And Reset ICsLTC2900-1IMS#TRPBF
MSOP-10-40℃~+85℃@(TA) 1V~5V 4 4.675V 43uA 7ms Active Low Manual reset input Open-drain Voltage monitor MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsISL28022FUZ
MSOP-10-40℃~+125℃ 3V~5.5V 700uA Open-drain Voltage monitor MSOP-10 Supervisor and Reset ICs ROHSRenesas ElectronicsSupervisor And Reset ICsLTC2918IMS-B1#TRPBF
MSOP-10-40℃~+85℃@(TA) 1 150ms Active Low Multi-Voltage Monitor Open Drain MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsLTC4151HMS#PBF
MSOP-10-40℃~+125℃@(Tj) 120uA 3 7V~80V Open Drain Voltage Monitor MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM1185ARMZ-1REEL7
MSOP-10-40℃~+85℃@(TA) 190ms 2.7V~5.5V 4 600mV 80uA Active High Open-drain Voltage monitor MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsLTC2900-1CMS#TRPBF
MSOP-104 5ms Active Low Open-drain Voltage monitor MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsLTC2900-1IMS#PBF
MSOP-10-40℃~+85℃@(TA) 1V~5V 4 4.675V 43uA 7ms Active Low Manual reset input Open-drain Voltage monitor MSOP-10 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICs
Questions
Is there a KiCad symbol and footprint for the LTC4151IMS?
Yes. The symbol is Sensor_Energy:LTC4151xMS and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LTC4151IMS?
MSOP-10, with 10 pins. Its footprint is drawn on this page.
Where is the LTC4151IMS datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the LTC4151IMS?
JLCPCB lists it as part C7456504, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LTC4151IMS?
Parts like it in the library: the TPS2490DGSR by Texas Instruments, the LTC2900-1IMS#TRPBF by Analog Devices, the ISL28022FUZ by Renesas Electronics and the LTC2918IMS-B1#TRPBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LTC4151IMS?
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.