LTC3260HMSE
Analog Devices
Low Noise Dual Supply, Inverting Charge Pump
- Part id
- adi/LTC3260HMSE
- Category
- Uncategorised
- Package
- MSOP16
- Pins
- 17
Overview
The LTC3260HMSE is an uncategorised made by Analog Devices in a MSOP16 package with 17 pins. Low Noise Dual Supply, Inverting Charge Pump.
PCBKit's library has its KiCad symbol (Regulator_SwitchedCapacitor:LTC3260xMSE, from KiCad's library) and its footprint (Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | EN+ | Input |
| 2 | RT | Input |
| 3 | BYP- | Passive |
| 4 | ADJ- | Input |
| 5 | LDO- | Power out |
| 6 | VOUT | Passive |
| 7 | C- | Passive |
| 8 | NC | Not connected |
| 9 | NC | Not connected |
| 10 | C+ | Passive |
| 11 | VIN | Power in |
| 12 | LDO+ | Power out |
| 13 | EN- | Input |
| 14 | MODE | Input |
| 15 | ADJ+ | Input |
| 16 | BYP+ | Passive |
| 17 | GND | Power in |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the LTC3260HMSE?
Yes. The symbol is Regulator_SwitchedCapacitor:LTC3260xMSE and the footprint Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LTC3260HMSE?
MSOP16, with 17 pins. Its footprint is drawn on this page.
What can replace the LTC3260HMSE?
Parts like it in the library: the LT8610EMSE by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.