LTC3026EMSE
Analog Devices
1.14V to 5.5V Input, 0.4V to 2.6V Output, 1.5A Low Input Voltage VLDO Linear Regulator
- Part id
- adi/LTC3026EMSE
- Category
- Uncategorised
- Package
- MSOP10
- Pins
- 11
Overview
The LTC3026EMSE is an uncategorised made by Analog Devices in a MSOP10 package with 11 pins. 1.14V to 5.5V Input, 0.4V to 2.6V Output, 1.5A Low Input Voltage VLDO Linear Regulator.
PCBKit's library has its KiCad symbol (Regulators:LTC3026, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOP50P490X110-11N-R168X198, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | IN | Input |
| 2 | IN | Input |
| 3 | GND | Power in |
| 4 | SW | Input |
| 5 | BST | Input |
| 6 | SHDN | Input |
| 7 | PG | Output |
| 8 | ADJ | Input |
| 9 | OUT | Output |
| 10 | OUT | Output |
| 11 | GND | Power in |
Parts like it
2Questions
Is there a KiCad symbol and footprint for the LTC3026EMSE?
Yes. The symbol is Regulators:LTC3026 and the footprint ICs And Semiconductors SMD:SOP50P490X110-11N-R168X198, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LTC3026EMSE?
MSOP10, with 11 pins. Its footprint is drawn on this page.
What can replace the LTC3026EMSE?
Parts like it in the library: the LT3758EMSE by Analog Devices and the LT8608EMSE by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.