LT3045EDD

Analog Devices

20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator

Part id: adi/LT3045EDD
Category: Uncategorised
Package: SON10
Pins: 11
Used on: 11 open-source boards

Overview

The LT3045EDD is an uncategorised made by Analog Devices in a SON10 package with 11 pins. 20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:LT3045xDD, from KiCad's library) and its footprint (Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm, from KiCad's library), ready for a KiCad board. 11 open-source boards in 9 repositories on GitHub use it.

Symbol

Regulator_Linear:LT3045xDDFrom KiCad's library

Footprint

Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mmFrom KiCad's library

Pinout

The pins of the LT3045EDD
Pin	Name	Type
1	IN	Power in
2	IN	Passive
3	EN/UV	Input
4	PG	Open collector
5	ILIM	Passive
6	PGFB	Input
7	SET	Passive
8	GND	Power in
9	OUTS	Input
10	OUT	Power out
11	GND	Passive

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/adi/LT3045EDD" title="LT3045EDD in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

11See all 11

4 layers100 × 80 mm
Open Beam Interface
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
334 parts371
4 layers68.8 × 68.6 mm
GMWM Analysis Board
thejamesrhodes/IMU-Quantisation-research-project
Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.
163 parts1MIT
4 layers128 × 84 mm
Dronemagnav2
ajisrawi/DroneMagNav2.0
DroneMagNav 2.0 - survey-fluxgate magnetic-anomaly navigation board for drones (IGRF-14 + EMAG2v3 continued to flight altitude)
222 parts
4 layers42.8 × 42.2 mm
CatLickDet
Nick-Lemberger/3DqsOBM
Supplementary material for the publication "Enabling 3D refractive index tomography in laser scanning microscopy with a simple tape-on detector".
78 partsGPL-3.0
4 layers100 × 80 mm
Open Beam Interface
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
320 parts371
4 layers100 × 80 mm
Open Beam Interface
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
334 parts371
2 layers10.2 × 14.6 mm
LT3042 breakout with error done
ljufa/rsplayer_hardware
kicad files for rsplayer music player hardware
10 parts2MIT
2 layers30 × 60 mm
Power Supply
Steven-Vokoun/RPI4-and-AD5933-EIS-Analyzer
Independent study project creating a portable potentiostatic EIS solution. Currently under development.
36 parts2

Parts like it

Questions

Is there a KiCad symbol and footprint for the LT3045EDD?

Yes. The symbol is Regulator_Linear:LT3045xDD and the footprint Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT3045EDD?

SON10, with 11 pins. Its footprint is drawn on this page.

What can replace the LT3045EDD?

Parts like it in the library: the LT3471EDD by Analog Devices and the LTC4316CDD by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT3045EDD?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.