
LT3042EMSE
Analog Devices
20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator
- Part id
- adi/LT3042EMSE
- Category
- Uncategorised
- Package
- MSOP10
- Pins
- 11
- Used on
- 2 open-source boards
Overview
The LT3042EMSE is an uncategorised made by Analog Devices in a MSOP10 package with 11 pins. 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator.
PCBKit's library has its KiCad symbol (Regulator_Linear:LT3042xMSE, from KiCad's library) and its footprint (Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | IN | Power in |
| 2 | IN | Passive |
| 3 | EN/UV | Input |
| 4 | PG | Open collector |
| 5 | ILIM | Passive |
| 6 | PGFB | Input |
| 7 | SET | Passive |
| 8 | GND | Power in |
| 9 | OUTS | Input |
| 10 | OUT | Power out |
| 11 | GND | Passive |
Open-source boards using it
2- 6 layers150 × 100 mm

- 2 layers10.2 × 14.6 mm

Parts like it
3LT3042EMSE(TOKMAS)
MSOP-101 1.6uVrms 120dB@(100Hz) 200mA 20V 330mV 500mV~16V Adjustable PG Pin、Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive MSOP-10 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTokmasUncategorisedLT3757EMSE
MSOP10Boost, Flyback, SEPIC and Inverting ControllerAnalog DevicesUncategorisedLTC3805EMSE
UncategorisedANALOG
Questions
Is there a KiCad symbol and footprint for the LT3042EMSE?
Yes. The symbol is Regulator_Linear:LT3042xMSE and the footprint Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LT3042EMSE?
MSOP10, with 11 pins. Its footprint is drawn on this page.
What can replace the LT3042EMSE?
Parts like it in the library: the LT3042EMSE(TOKMAS) by Tokmas, the LT3757EMSE by Analog Devices and the LTC3805EMSE by ANALOG. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LT3042EMSE?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.