
SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
Analog Devices
Dual 20V 150mA Positive/Negative Low Noise Low Dropout Linear Regulator
The LT3032EDE is an uncategorised made by Analog Devices in a DFN14 package with 16 pins. Dual 20V 150mA Positive/Negative Low Noise Low Dropout Linear Regulator.
PCBKit's library has its KiCad symbol (Regulators:LT3032, from CERN's library) and its footprint (ICs And Semiconductors SMD:LINEAR_DE14MA, from CERN's library), ready for a KiCad board. 6 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | OUTP | Power in |
| 2 | ADJP | Input |
| 3 | BYPP | Passive |
| 4 | GND | Power in |
| 5 | GND | Power in |
| 6 | INN | Input |
| 7 | OUTN | Power in |
| 8 | ADJN | Input |
| 9 | INN | Input |
| 10 | SHDNN | Input |
| 11 | BYPN | Passive |
| 12 | SHDNP | Input |
| 13 | NC | Passive |
| 14 | INP | Input |
| 15 | EP(GND) | Power in |
| 16 | EP(INN) | Power in |

nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier





Yes. The symbol is Regulators:LT3032 and the footprint ICs And Semiconductors SMD:LINEAR_DE14MA, both drawn on this page. PCBKit places them on a board for you when you design with it.
DFN14, with 16 pins. Its footprint is drawn on this page.
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.