2 layers
HMC799LP3E
Analog DevicesExtended
0Hz~700MHz 4.5V~5.5V 42dB 70mA QFN-16(3x3) RF Amplifiers ROHS
- Part id
- adi/HMC799LP3E
- Category
- RF Amplifiers
- Package
- QFN-16(3x3)
- Pins
- 17
- In stock
- 0 at JLCPCB (C3176413)
- Used on
- 1 open-source board
Overview
The HMC799LP3E is a RF Amplifier made by Analog Devices in a QFN-16(3x3) package with 17 pins. 0Hz~700MHz 4.5V~5.5V 42dB 70mA QFN-16(3x3) RF Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:HMC799LP3E, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3176413). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | VCC | Power in |
| 2 | CFILT | Passive |
| 3 | IN | Input |
| 4 | CEXT | Passive |
| 5 | NC | Not connected |
| 6 | NC | Not connected |
| 7 | NC | Not connected |
| 8 | NC | Not connected |
| 9 | NC | Not connected |
| 10 | — | Output |
| 11 | NC | Not connected |
| 12 | VCC | Passive |
| 13 | NC | Not connected |
| 14 | VCC | Passive |
| 15 | NC | Not connected |
| 16 | NC | Not connected |
| 17 | GND | Power in |
Open-source boards using it
1Questions
Is there a KiCad symbol and footprint for the HMC799LP3E?
Yes. The symbol is Amplifier_Operational:HMC799LP3E and the footprint Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the HMC799LP3E?
QFN-16(3x3), with 17 pins. Its footprint is drawn on this page.
Where is the HMC799LP3E datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the HMC799LP3E?
JLCPCB lists it as part C3176413, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the HMC799LP3E?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.