DAC8718SPAG
Analog Devices
Octal, 16-Bit, Low-Power, High-Voltage Output, Serial Input Digital-to-Analog Converter
- Part id
- adi/DAC8718SPAG
- Category
- Uncategorised
- Package
- QFP64
- Pins
- 64
Overview
The DAC8718SPAG is an uncategorised made by Analog Devices in a QFP64 package with 64 pins. Octal, 16-Bit, Low-Power, High-Voltage Output, Serial Input Digital-to-Analog Converter.
PCBKit's library has its KiCad symbol (Analog & Interface:DAC8718SPAG, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFP50P1200X1200X120-64N, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
64| Pin | Name | Type |
|---|---|---|
| 1 | AVDD | Power in |
| 2 | NC | Passive |
| 3 | AIN-0 | Input |
| 4 | VOUT-3 | Output |
| 5 | REF-A | Input |
| 6 | VOUT-2 | Output |
| 7 | VOUT-1 | Output |
| 8 | AGND-A | Power in |
| 9 | AGND-A | Power in |
| 10 | OFFSET-A | Output |
| 11 | VOUT-0 | Output |
| 12 | AVSS | Power in |
| 13 | NC | Passive |
| 14 | VMON | Tri-state |
| 15 | NC | Passive |
| 16 | NC | Passive |
| 17 | NC | Passive |
| 18 | NC | Passive |
| 19 | GPIO-2 | Input/output |
| 20 | CLR | Input |
| 21 | RST | Input |
| 22 | NC | Passive |
| 23 | NC | Passive |
| 24 | DVDD | Power in |
| 25 | DGND | Power in |
| 26 | NC | Passive |
| 27 | NC | Passive |
| 28 | DGND | Power in |
| 29 | GPIO-1 | Input/output |
| 30 | GPIO-0 | Input/output |
| 31 | NC | Passive |
| 32 | NC | Passive |
| 33 | NC | Passive |
| 34 | NC | Passive |
| 35 | NC | Passive |
| 36 | NC | Passive |
| 37 | AVSS | Power in |
| 38 | VOUT-7 | Output |
| 39 | OFFSET-B | Output |
| 40 | AGND-B | Power in |
| 41 | AGND-B | Power in |
| 42 | VOUT-6 | Output |
| 43 | VOUT-5 | Output |
| 44 | REF-B | Input |
| 45 | VOUT-4 | Output |
| 46 | AIN-1 | Input |
| 47 | NC | Passive |
| 48 | AVDD | Power in |
| 49 | NC | Passive |
| 50 | USB/BTC | Input |
| 51 | RSTSEL | Input |
| 52 | NC | Passive |
| 53 | NC | Passive |
| 54 | DGND | Power in |
| 55 | IOVDD | Power in |
| 56 | DVDD | Power in |
| 57 | SCLK | Input |
| 58 | CS | Input |
| 59 | SDI | Input |
| 60 | NC | Passive |
| 61 | SDO | Tri-state |
| 62 | LDAC | Input |
| 63 | WAKEUP | Input |
| 64 | NC | Passive |
Parts like it
6FT4232HL
QFP64Quad High Speed USB to Multipurpose UART/MPSSE ICFTDIUncategorisedAD7609BST
QFP648-Channel Differential DAS with 18-Bit, Bipolar Simultaneous Sampling ADCAnalog DevicesUncategorisedPIC18F6527
QFP641-Mbit, Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology, 64-Pin TQFP (10x10x1.2mm), Industrial TemperatureMicrochip TechnologyUncategorisedDAC7654YB
QFP6416-Bit, Quad Voltage Output DACTexas InstrumentsUncategorisedDS92LV3221TVS
QFP6420-50 MHz 32-Bit Channel Link II SerializerTexas InstrumentsUncategorisedDS92LV3222TVS
QFP6420-50 MHz 32-Bit Channel Link II DeserializerTexas InstrumentsUncategorised
Questions
Is there a KiCad symbol and footprint for the DAC8718SPAG?
Yes. The symbol is Analog & Interface:DAC8718SPAG and the footprint ICs And Semiconductors SMD:QFP50P1200X1200X120-64N, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DAC8718SPAG?
QFP64, with 64 pins. Its footprint is drawn on this page.
What can replace the DAC8718SPAG?
Parts like it in the library: the FT4232HL by FTDI, the AD7609BST by Analog Devices, the PIC18F6527 by Microchip Technology and the DAC7654YB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.