Skip to the content
9

ADP7183ACPZN2.5-R7

Analog DevicesExtended

-40℃~+125℃@(Tj) 1 130mV@(300mA) 2.5V 300mA 4uVrms 5.5V 75dB@(10kHz) Fixed Negative Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable LFCSP-8(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7183ACPZN2.5-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
LFCSP-8(2x2)
Pins
9
In stock
6 at JLCPCB (C659414)
Used on
1 open-source board

Overview

The ADP7183ACPZN2.5-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a LFCSP-8(2x2) package with 9 pins. -40℃~+125℃@(Tj) 1 130mV@(300mA) 2.5V 300mA 4uVrms 5.5V 75dB@(10kHz) Fixed Negative Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable LFCSP-8(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADP7183ACPZN2.5-R7, from EasyEDA) and its footprint (EasyEDA_Cloud:LFCSP-8_L2.0-W2.0-P0.50-BL-EP1.5, from EasyEDA), ready for a KiCad board. 6 are in stock at JLCPCB (part C659414). 1 open-source board in 1 repository on GitHub use it.

Symbol

VOUT1SENSE2VA3VAFB4EN5GND6VREG7VIN8EP9
EasyEDA_Cloud:ADP7183ACPZN2.5-R7From EasyEDA

Footprint

9
EasyEDA_Cloud:LFCSP-8_L2.0-W2.0-P0.50-BL-EP1.5From EasyEDA

Pinout

9
The pins of the ADP7183ACPZN2.5-R7
PinNameType
1VOUTUnspecified
2SENSEUnspecified
3VAUnspecified
4VAFBUnspecified
5ENUnspecified
6GNDUnspecified
7VREGUnspecified
8VINUnspecified
9EPUnspecified

Open-source boards using it

1
  • 4 layers85.6 × 54 mmJammer Front End, the printed circuit board in 3D

    Jammer Front End

    adrianiaz/Jammer_Front_End

    Design of a switched and tunable RF preselector that selects bands within 2-18 GHz for direct-sampling receiver applications..

    116 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7183ACPZN2.5-R7?

Yes. The symbol is EasyEDA_Cloud:ADP7183ACPZN2.5-R7 and the footprint EasyEDA_Cloud:LFCSP-8_L2.0-W2.0-P0.50-BL-EP1.5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7183ACPZN2.5-R7?

LFCSP-8(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the ADP7183ACPZN2.5-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7183ACPZN2.5-R7?

JLCPCB lists it as part C659414, with 6 in stock; the sellers' links on this page open their listings.

What can replace the ADP7183ACPZN2.5-R7?

Parts like it in the library: the ADP7185ACPZN2.5-R7 by Analog Devices, the LR8103B-T25 by LR, the ME6211C25M5G-N by MICRONE and the AMS1117-2.5 by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7183ACPZN2.5-R7?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.