Skip to the content
12345

ADP7142AUJZ-1.8-R7

Analog DevicesExtended

-40℃~+125℃@(Ta) 1 1.8V 200mA 40V 68dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7142AUJZ-1.8-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
13 at JLCPCB (C659366)
Used on
3 open-source boards

Overview

The ADP7142AUJZ-1.8-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃@(Ta) 1 1.8V 200mA 40V 68dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7142AUJZ-1.8, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 13 are in stock at JLCPCB (part C659366). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1VIN2GND3EN4SENSE/ADJ5VOUT
Regulator_Linear:ADP7142AUJZ-1.8From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7142AUJZ-1.8-R7
PinNameType
1VINPower in
2GNDPower in
3ENInput
4SENSE/ADJInput
5VOUTPower out

Open-source boards using it

3
  • 4 layers125 × 70 mmAD4030-Current, the printed circuit board in 3D

    AD4030-Current

    BehrensG/ARTY_Z7

    Repository with test projects to learn Zynq 7000 SoC.

    194 parts1
  • 2 layers72.5 × 55 mmB PSU 0x00, the printed circuit board in 3D

    B PSU 0x00

    EmilsSturitis/BPSU

    Bipolar power supply board, for op-amp's and other things

    78 parts1
  • 4 layers24.8 × 12.7 mmAnalogfrontend, the printed circuit board in 3D

    Analogfrontend

    kpezeshki/stm_all

    Code, data, and postprocessing / visualization

    18 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7142AUJZ-1.8-R7?

Yes. The symbol is Regulator_Linear:ADP7142AUJZ-1.8 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7142AUJZ-1.8-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7142AUJZ-1.8-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7142AUJZ-1.8-R7?

JLCPCB lists it as part C659366, with 13 in stock; the sellers' links on this page open their listings.

What can replace the ADP7142AUJZ-1.8-R7?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7142AUJZ-1.8-R7?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.