Skip to the content
SOIC-8-EP

ADP7118ARDZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃ 1 11uVrms 200mA 20V 3.3V 420mV@(200mA) 50dB@(1MHz)、88dB@(10kHz) 50uA Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7118ARDZ-3.3-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOIC-8-EP
Pins
9
In stock
332 at JLCPCB (C153731)
Used on
2 open-source boards

Overview

The ADP7118ARDZ-3.3-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a SOIC-8-EP package with 9 pins. -40℃~+125℃ 1 11uVrms 200mA 20V 3.3V 420mV@(200mA) 50dB@(1MHz)、88dB@(10kHz) 50uA Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADP7118ARDZ-3.3, from EasyEDA), ready for a KiCad board. 332 are in stock at JLCPCB (part C153731). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

EP9VIN8VIN7SS6EN5GND4SENSE/ADJ3VOUT2VOUT1
EasyEDA_Cloud:ADP7118ARDZ-3.3From EasyEDA

Footprint

The library has no footprint for this part yet.

Pinout

9
The pins of the ADP7118ARDZ-3.3-R7
PinNameType
1VOUTUnspecified
2VOUTUnspecified
3SENSE/ADJUnspecified
4GNDUnspecified
5ENUnspecified
6SSUnspecified
7VINUnspecified
8VINUnspecified
9EPUnspecified

Open-source boards using it

2
  • 4 layers115 × 32 mmADC RS MCU, the printed circuit board in 3D

    ADC RS MCU

    Geophysical-Instrumentation-Group-UL/Geophysical-Open-Seismic-Hardware

    Hardware and firmware of the Geophysical Open Seismic Hardware project. The goal is to stimulate open development in geophysical instrumentation

    81 parts20GPL-3.0
  • 4 layers100 × 100 mmDIY AWG V1.1, the printed circuit board in 3D

    DIY AWG V1.1

    Xpeditor15/DIY_AWG_V1.0

    235 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7118ARDZ-3.3-R7?

Yes. The symbol is EasyEDA_Cloud:ADP7118ARDZ-3.3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7118ARDZ-3.3-R7?

SOIC-8-EP, with 9 pins.

Where is the ADP7118ARDZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7118ARDZ-3.3-R7?

JLCPCB lists it as part C153731, with 332 in stock; the sellers' links on this page open their listings.

What can replace the ADP7118ARDZ-3.3-R7?

Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the XC6206P332MR-MS by MSKSEMI and the XC6206P332MR by Torex Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7118ARDZ-3.3-R7?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.