ADP1621ARM
Analog Devices
Constant-Frequency, Current-Mode Step-Up DC-to-DC Controller
- Part id
- adi/ADP1621ARM
- Category
- Uncategorised
- Package
- MSOP10
- Pins
- 10
Overview
The ADP1621ARM is an uncategorised made by Analog Devices in a MSOP10 package with 10 pins. Constant-Frequency, Current-Mode Step-Up DC-to-DC Controller.
PCBKit's library has its KiCad symbol (Regulators:ADP1621, from CERN's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | SDSN | Input |
| 2 | GND | Power in |
| 3 | COMP | Input |
| 4 | FB | Input |
| 5 | FREQ | Input |
| 6 | PGND | Power in |
| 7 | GATE | Output |
| 8 | PIN | Input |
| 9 | CS | Input |
| 10 | IN | Input |
Parts like it
8
MS5112M
MSOP-10-40℃~+125℃ 16 2 2.7V~5.5V 240Hz 275kHz 290uA Built-in Built-in I2C Multiplexers、Power-on reset、Bipolar input、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes MSOP-10 Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechUncategorisedLKP4153MS
MSOP-10MSOP-10 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLKWICUncategorisedXADC084S021-XC
MSOP-10-40℃~+85℃ 0.4LSB 1.6MHz~6.4MHz 2.7V~5.25V 200kHz 4 49.5dB 8 Built-in External Multiplexers No Not supported SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedXADC084S051-XC
MSOP-10-40℃~+85℃ 0.5LSB 2.7V~5.25V 3.2MHz~8MHz 4 49.5dB 500kHz 8 Built-in External Multiplexers No SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedVP3481MSG10-B
MSOP-10UncategorisedVIVALTC5223YV10
MSOP-10LUncategorisedLinearinTPC5180-VS2R
MSOP10Multi-chip synchronization、Synchronous triggering MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorisedTPC6160IS-VS2R
MSOP10MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorised
Questions
Is there a KiCad symbol and footprint for the ADP1621ARM?
Yes. The symbol is Regulators:ADP1621 and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADP1621ARM?
MSOP10, with 10 pins. Its footprint is drawn on this page.
What can replace the ADP1621ARM?
Parts like it in the library: the MS5112M by Hangzhou Ruimeng Tech, the LKP4153MS by LKWIC, the XADC084S021-XC by Si-Change and the XADC084S051-XC by Si-Change. Check their datasheets: a part that fits the footprint may still differ in its ratings.