Skip to the content
12345

ADP160AUJZ-1.8-R7

Analog DevicesExtended

-40℃~+125℃ 1 1.8V 150mA 5.5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP160AUJZ-1.8-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
13 at JLCPCB (C658782)
Used on
5 open-source boards

Overview

The ADP160AUJZ-1.8-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.8V 150mA 5.5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 13 are in stock at JLCPCB (part C658782). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

1IN3EN5OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP160AUJZ-1.8-R7
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

5
  • 2 layers40 × 46.2 mmMCU, the printed circuit board in 3D

    MCU

    Ironman-007/HexSense_Canary_Islands

    56 parts1
  • 4 layers60 × 66.5 mmProject MAXFPGA, the printed circuit board in 3D

    Project MAXFPGA

    skykraft-au/Turtle-GPS-orbit-determination-system

    224 parts1
  • 4 layers93 × 46.9 mmDogTracker, the printed circuit board in 3D

    DogTracker

    angiet642/DogTracker

    A common issue pet-owners face is discovering that their pet has escaped the house. To prevent this situation, our team is interested in designing a low-power dog tracker using LoRa.

    22 parts
  • 2 layers40 × 46.2 mmMCU, the printed circuit board in 3D

    MCU

    Ironman-007/HexSense_Canary_Islands

    55 parts1
  • 2 layers40 × 46.2 mmMCU, the printed circuit board in 3D

    MCU

    Ironman-007/HexSense_Canary_Islands

    44 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP160AUJZ-1.8-R7?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP160AUJZ-1.8-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP160AUJZ-1.8-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP160AUJZ-1.8-R7?

JLCPCB lists it as part C658782, with 13 in stock; the sellers' links on this page open their listings.

What can replace the ADP160AUJZ-1.8-R7?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP160AUJZ-1.8-R7?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.