Skip to the content
0

ADM7171ACPZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃ 1 1A 2mA 3.3V 42mV@(500mA) 5uVrms 6.5V 60dB@(100kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive LFCSP-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADM7171ACPZ-3.3-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
LFCSP-8(3x3)
Pins
8
In stock
16 at JLCPCB (C514341)
Used on
6 open-source boards

Overview

The ADM7171ACPZ-3.3-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a LFCSP-8(3x3) package with 9 pins. -40℃~+125℃ 1 1A 2mA 3.3V 42mV@(500mA) 5uVrms 6.5V 60dB@(100kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive LFCSP-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADM7171ACPZ-3.3-R7, from EasyEDA) and its footprint (EasyEDA_Cloud:LFCSP-8_L3.0-W3.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 16 are in stock at JLCPCB (part C514341). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

VOUT1VOUT2SENSE3SS4EN5GND6VIN7VIN8EP0
EasyEDA_Cloud:ADM7171ACPZ-3.3-R7From EasyEDA

Footprint

0
EasyEDA_Cloud:LFCSP-8_L3.0-W3.0-P0.50-BL-EPFrom EasyEDA

Pinout

9
The pins of the ADM7171ACPZ-3.3-R7
PinNameType
0EPUnspecified
1VOUTUnspecified
2VOUTUnspecified
3SENSEUnspecified
4SSUnspecified
5ENUnspecified
6GNDUnspecified
7VINUnspecified
8VINUnspecified

Open-source boards using it

6
  • 4 layers129.5 × 52.3 mmPn wing prototype, the printed circuit board in 3D

    Pn wing prototype

    loxodes/phasenoise

    Prototype phase noise analyzer

    277 parts23MIT
  • 2 layers140.6 × 25.9 mmESP32 SmartGlass, the printed circuit board in 3D

    ESP32 SmartGlass

    jobitjoseph/ESP32-AI-SmartGlass

    The ESP32 AI Smartglass is an innovative wearable device that blends the power of artificial intelligence with the convenience of home automation.

    47 parts16
  • 4 layers165 × 50 mmHUB0402, the printed circuit board in 3D

    HUB0402

    jobitjoseph/All-in-one-USB-3.1-Hub-for-EE-Engineers

    311 parts8
  • 4 layers96 × 70 mmTedium x8, the printed circuit board in 3D

    Tedium x8

    jboone/tedium

    TDM telephony experimentation

    283 parts3BSD-3-Clause
  • 2 layers25.7 × 14.6 mmGesture Recognition, the printed circuit board in 3D

    Gesture Recognition

    Circuit-Digest/Gesture-recognition-APDS9500

    Gesture recognition module using APDS9500

    55 parts
  • 4 layers100 × 72 mmFour layer v2, the printed circuit board in 3D

    Four layer v2

    Kayzerjali/UQ_Magnetometer_Data_Logger

    Code for the data logging system of the UQ Magnetometer

    62 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADM7171ACPZ-3.3-R7?

Yes. The symbol is EasyEDA_Cloud:ADM7171ACPZ-3.3-R7 and the footprint EasyEDA_Cloud:LFCSP-8_L3.0-W3.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADM7171ACPZ-3.3-R7?

LFCSP-8(3x3), with 9 pins. Its footprint is drawn on this page.

Where is the ADM7171ACPZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADM7171ACPZ-3.3-R7?

JLCPCB lists it as part C514341, with 16 in stock; the sellers' links on this page open their listings.

What can replace the ADM7171ACPZ-3.3-R7?

Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the AMS1117-3.3V by MSKSEMI and the AMS1117-3.3S by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADM7171ACPZ-3.3-R7?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.