ADM708SAN
Analog DevicesExtended
1 160ms Push-pull Simple Reset/Power-On Reset PDIP-8 Supervisor and Reset ICs ROHS
- Part id
- adi/ADM708SAN
- Category
- Supervisor And Reset ICs
- Package
- PDIP-8
- Pins
- 5
- In stock
- 0 at JLCPCB (C3686383)
Overview
The ADM708SAN is a supervisor And Reset IC made by Analog Devices in a PDIP-8 package with 8 pins. 1 160ms Push-pull Simple Reset/Power-On Reset PDIP-8 Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CBM708TAS8, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3686383).
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | MR# | Unspecified |
| 2 | VCC | Unspecified |
| 3 | GND | Unspecified |
| 4 | PFI | Unspecified |
| 5 | PFO# | Unspecified |
| 6 | NC | Unspecified |
| 7 | RESET# | Unspecified |
| 8 | RESET | Unspecified |
Parts like it
8
GL7101AN
DIP-8-30℃~+85℃@(TA) 1 12V 15.6mV 400uA DIP-8 Supervisor and Reset ICs ROHSHTC Korea TAEJIN TechSupervisor And Reset ICsGL7101SN
DIP-8-30℃~+85℃ 1 11.5mV、13.86mV 12V~20V 4ms No No DIP-8 Supervisor and Reset ICs ROHSHTC Korea TAEJIN TechSupervisor And Reset ICsADM707ANZ
PDIP-8-40℃~+85℃@(TA) 1 190uA 1V~5.5V 200ms 4.65V Active High Manual reset input Push-pull Voltage monitor PDIP-8 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsDS1232N
DIP-8-10℃~+70℃ 1 250ms 4.37V、4.62V 4.5V~5.5V Active Low Open Drain、Push-pull Power Supervisor Yes Yes DIP-8 Supervisor and Reset ICs ROHSHTC Korea TAEJIN TechSupervisor And Reset ICsMAX690AEPA+
PDIP-8-40℃~+85℃@(Ta) 1 1V~5.5V 200ms 4.65V Active Low No Power Supervisor Push-pull Yes PDIP-8 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICsMAX707CPA+
PDIP-80℃~+70℃@(Ta) 1 1V~5.5V 200ms 4.65V 50uA Active High No Push-pull Voltage Monitor Yes PDIP-8 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICsMAX8212CPA+
PDIP-8-40℃~+85℃ 1 2V~16.5V Active Low No No Open Drain Voltage Detector PDIP-8 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICsTL7702ACP
PDIP-80℃~+70℃@(Tj) 1 1.2ms 2.53V 3.5V~18V Active Low Push-pull Voltage Monitor Yes PDIP-8 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
Questions
Is there a KiCad symbol and footprint for the ADM708SAN?
Yes. The symbol is EasyEDA_Cloud:CBM708TAS8 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADM708SAN?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the ADM708SAN datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the ADM708SAN?
JLCPCB lists it as part C3686383, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADM708SAN?
Parts like it in the library: the GL7101AN by HTC Korea TAEJIN Tech, the GL7101SN by HTC Korea TAEJIN Tech, the ADM707ANZ by Analog Devices and the DS1232N by HTC Korea TAEJIN Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.