Skip to the content
12345678

ADM485AQ

Analog DevicesExtended

1 1 4.75V~5.25V Enable shutdown、Overcurrent Protection、Thermal shutdown protection、Tx/Rx enable Transceiver CERDIP-8 RS-485 / RS-422 ICs ROHS

Part id
adi/ADM485AQ
Category
RS 485, RS 422 ICs
Package
CERDIP-8
Pins
8
In stock
0 at JLCPCB (C3229586)
Used on
3 open-source boards

Overview

The ADM485AQ is a RS 485, RS 422 IC made by Analog Devices in a CERDIP-8 package with 8 pins. 1 1 4.75V~5.25V Enable shutdown、Overcurrent Protection、Thermal shutdown protection、Tx/Rx enable Transceiver CERDIP-8 RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SN75176ADR-MS, from EasyEDA) and its footprint (Package_DIP:CERDIP-8_W7.62mm_SideBrazed, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3229586). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1RO2RE#3DE4DI5GND6A7B8VCC
EasyEDA_Cloud:SN75176ADR-MSFrom EasyEDA

Footprint

12345678
Package_DIP:CERDIP-8_W7.62mm_SideBrazedFrom KiCad's library

Pinout

8
The pins of the ADM485AQ
PinNameType
1ROUnspecified
2RE#Unspecified
3DEUnspecified
4DIUnspecified
5GNDUnspecified
6AUnspecified
7BUnspecified
8VCCUnspecified

Open-source boards using it

3
  • 4 layers103 × 126 mmSenzori iradiere, the printed circuit board in 3D

    Senzori iradiere

    cs-pub-ro/smart-solar-irradiance-sensor

    Open-source hardware & software for a smart wireless sensor that measures solar irradiance.

    351 parts
  • 2 layers85 × 100 mm6AI 4AO, the printed circuit board in 3D

    6AI 4AO

    thoczek/Modbus-IO

    Modbus I/O modules on ATmega

    87 partsLGPL-3.0
  • 2 layers85 × 64 mmWIFI-485, the printed circuit board in 3D

    WIFI-485

    thoczek/Modbus-IO

    Modbus I/O modules on ATmega

    36 partsLGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADM485AQ?

Yes. The symbol is EasyEDA_Cloud:SN75176ADR-MS and the footprint Package_DIP:CERDIP-8_W7.62mm_SideBrazed, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADM485AQ?

CERDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ADM485AQ datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADM485AQ?

JLCPCB lists it as part C3229586, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ADM485AQ?

Parts like it in the library: the LT1785AIN8#PBF by Analog Devices, the SN75176AP by Texas Instruments, the SN75LBC176P by Texas Instruments and the UA9638CP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADM485AQ?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.