Skip to the content
123456

ADG802BRT

Analog Devices

CMOS 1.8 V to 5.5 V, <0.4 Ohm SPST Switches (Normally Closed)

Part id
adi/ADG802BRT
Category
Uncategorised
Package
SOT23-6
Pins
6
Used on
2 open-source boards

Overview

The ADG802BRT is an uncategorised made by Analog Devices in a SOT23-6 package with 6 pins. CMOS 1.8 V to 5.5 V, <0.4 Ohm SPST Switches (Normally Closed).

PCBKit's library has its KiCad symbol (Analog & Interface:ADG802BRTZ, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 2 open-source boards in 1 repository on GitHub use it.

Symbol

1D4IN6VDD2S5NC3GND
Analog & Interface:ADG802BRTZFrom CERN's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the ADG802BRT
PinNameType
1DInput/output
2SInput/output
3GNDPower in
4INInput
5NCPassive
6VDDPower in

Open-source boards using it

2
  • 2 layers59.8 × 52.5 mmYkts geigerboard, the printed circuit board in 3D

    Ykts geigerboard

    cansat-ptl/cubesat-boards

    YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards

    29 parts
  • 2 layers17.8 × 13.7 mmYkts mcu node, the printed circuit board in 3D

    Ykts mcu node

    cansat-ptl/cubesat-boards

    YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards

    25 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADG802BRT?

Yes. The symbol is Analog & Interface:ADG802BRTZ and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADG802BRT?

SOT23-6, with 6 pins. Its footprint is drawn on this page.

What can replace the ADG802BRT?

Parts like it in the library: the SRV05-4 by DongChen, the TPS62A01PDDC by Texas Instruments, the TD2263 by TDSEMIC and the UCC287506DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADG802BRT?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.