Skip to the content
12345678

ADA4807-2ARM

Analog Devices

3.1 nV/sqrt Hz, 1 mA, 180 MHz, Rail-to-Rail Input/Output Amplifiers

Part id
adi/ADA4807-2ARM
Category
Uncategorised
Package
MSOP8
Pins
8
Used on
6 open-source boards

Overview

The ADA4807-2ARM is an uncategorised made by Analog Devices in a MSOP8 package with 8 pins. 3.1 nV/sqrt Hz, 1 mA, 180 MHz, Rail-to-Rail Input/Output Amplifiers.

PCBKit's library has its KiCad symbol (Amplifier_Operational:ADA4807-2ARM, from KiCad's library) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 6 open-source boards in 5 repositories on GitHub use it.

Symbol

12-3+
Amplifier_Operational:ADA4807-2ARMFrom KiCad's library

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the ADA4807-2ARM
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

6
  • 2 layers69 × 28 mmLaser Backplane DVI, the printed circuit board in 3D

    Laser Backplane DVI

    TU-Darmstadt-APQ/Laser_Backplane_DVI

    Laser backplane with DVI connector featuring fast current modulation and a laser diode protection.

    47 parts7CERN-OHL-W-2.0
  • 2 layers173.5 × 85 mmWhitterm hat, the printed circuit board in 3D

    Whitterm hat

    tuna-f1sh/whitterm-wt220

    Design files, firmware and linux scripts for my /clever/ serial terminal, the Whitterm-220 - WT-220.

    208 parts4GPL-3.0
  • 4 layers60 × 40 mmTCD1304Rev2, the printed circuit board in 3D

    TCD1304Rev2

    CheckAG/spectrometer_HW

    Refer to this link for the checksum integration https://www.tutorialspoint.com/cyclic-redundancy-check-crc-in-arduino

    26 parts1
  • 4 layers71 × 83.3 mmSTM SHIELD, the printed circuit board in 3D

    STM SHIELD

    Thoric16/bakalarka

    bachelor's theses

    86 parts1
  • 4 layers106.2 × 89.3 mm3CH AWG TIA v103, the printed circuit board in 3D

    3CH AWG TIA v103

    GrandFatherPikhto/3CH-AWG-TIA

    3 Channels AWG Tia Generator on 10CL006, AD9707, ADA4807-2

    1,135 parts
  • 4 layers3CH AWG TIA v103 (Copy), the printed circuit board in 3D

    3CH AWG TIA v103 (Copy)

    GrandFatherPikhto/3CH-AWG-TIA

    3 Channels AWG Tia Generator on 10CL006, AD9707, ADA4807-2

    338 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADA4807-2ARM?

Yes. The symbol is Amplifier_Operational:ADA4807-2ARM and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADA4807-2ARM?

MSOP8, with 8 pins. Its footprint is drawn on this page.

What can replace the ADA4807-2ARM?

Parts like it in the library: the TPC112S1-VR by 3PEAK, the CS48505AM by Chipanalog, the CS48520AM by Chipanalog and the OB2269MM/TR-HG by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADA4807-2ARM?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.