
ArduinoSpecAn
andreasb242/OpenNetworkAnalyzer
Improved software for https://hackaday.io/project/10021-arduino-network-analyzer
Analog DevicesExtended
-40℃~+85℃ 10 180MHz 1LSB 2.7V~5.25V 32 650mW 85dB Integrated modulator、Phase continuous switching、Low-power mode、Enable/shutdown function、Integrated phase-locked loop、Multi-chip synchronization、ESD protection Parallel port SSOP-28-208mil Direct Digital Synthesis (DDS) ROHS
The AD9851BRS is a direct Digital Synthesi made by Analog Devices in a SSOP-28-208mil package with 28 pins. -40℃~+85℃ 10 180MHz 1LSB 2.7V~5.25V 32 650mW 85dB Integrated modulator、Phase continuous switching、Low-power mode、Enable/shutdown function、Integrated phase-locked loop、Multi-chip synchronization、ESD protection Parallel port SSOP-28-208mil Direct Digital Synthesis (DDS) ROHS.
PCBKit's library has its KiCad symbol (Interface:AD9851, from KiCad's library) and its footprint (Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 9 are in stock at JLCPCB (part C653898). 2 open-source boards in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | D3 | Input |
| 2 | D2 | Input |
| 3 | D1 | Input |
| 4 | D0 | Input |
| 5 | PGND | Power in |
| 6 | PVCC | Power in |
| 7 | W_CLK | Input |
| 8 | FQ_UD | Input |
| 9 | REFCLK | Input |
| 10 | AGND | Power in |
| 11 | AVDD | Power in |
| 12 | RSET | Passive |
| 13 | VOUTN | Output |
| 14 | VOUTP | Output |
| 15 | VINN | Input |
| 16 | VINP | Input |
| 17 | DACBP | Passive |
| 18 | AVDD | Passive |
| 19 | AGND | Passive |
| 20 | IOUTB | Output |
| 21 | IOUT | Output |
| 22 | RESET | Input |
| 23 | DVDD | Power in |
| 24 | DGND | Power in |
| 25 | D7 | Input |
| 26 | D6 | Input |
| 27 | D5 | Input |
| 28 | D4 | Input |

andreasb242/OpenNetworkAnalyzer
Improved software for https://hackaday.io/project/10021-arduino-network-analyzer

andreasb242/OpenNetworkAnalyzer
Improved software for https://hackaday.io/project/10021-arduino-network-analyzer
Yes. The symbol is Interface:AD9851 and the footprint Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SSOP-28-208mil, with 28 pins. Its footprint is drawn on this page.
Analog Devices publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C653898, with 9 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AD9851BRSZRL by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.