AD9102BCP
Analog Devices
Low Power, 14-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator
- Part id
- adi/AD9102BCP
- Category
- Uncategorised
- Package
- QFN32
- Pins
- 33
Overview
The AD9102BCP is an uncategorised made by Analog Devices in a QFN32 package with 33 pins. Low Power, 14-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator.
PCBKit's library has its KiCad symbol (Analog & Interface:AD9102, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P500X500X80-33N-S375, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
33| Pin | Name | Type |
|---|---|---|
| 1 | SCLK | Input |
| 2 | SDIO | Input/output |
| 3 | DGND | Power in |
| 4 | DLDO2 | Output |
| 5 | DVDD | Power in |
| 6 | DLDO1 | Output |
| 7 | SDO/SDI2/DOUT | Input/output |
| 8 | CS | Input |
| 9 | RESET | Input |
| 10 | NC | Passive |
| 11 | NC | Passive |
| 12 | AVDD2 | Power in |
| 13 | NC | Passive |
| 14 | NC | Passive |
| 15 | AGND | Power in |
| 16 | NC | Passive |
| 17 | NC | Passive |
| 18 | REFIO | Input/output |
| 19 | CLKGND | Power in |
| 20 | CLKN | Input |
| 21 | CLKP | Input |
| 22 | CLDO | Power in |
| 23 | CLKVDD | Power in |
| 24 | CAL_SENSE | Input |
| 25 | FSADJ | Input |
| 26 | AGND | Power in |
| 27 | IOUTP | Output |
| 28 | IOUTN | Output |
| 29 | AVDD1 | Power in |
| 30 | NC | Passive |
| 31 | NC | Passive |
| 32 | TRIGGER | Input |
| 33 | EP | Power in |
Parts like it
5
AD7124-4BCP
QFN324-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and ReferenceAnalog DevicesUncategorisedADF4355-2BCP
QFN32Microwave Wideband Synthesizer with Integrated VCOAnalog DevicesUncategorisedADF5356BCP
QFN32Microwave Wideband Synthesizer with Integrated VCOAnalog DevicesUncategorisedXRP7713ILB-F
QFN32Three Channel Digital PWM Step Down ControllerEXARUncategorisedLPC11U35FHI33
QFN3232-Bit ARM Cortex-M0 Microcontroller; Up to 128 kB flash; Up to 12 kB SRAM and 4 kB EEPROM; USB device; USARTNXP SemiconductorsUncategorised
Questions
Is there a KiCad symbol and footprint for the AD9102BCP?
Yes. The symbol is Analog & Interface:AD9102 and the footprint ICs And Semiconductors SMD:QFN50P500X500X80-33N-S375, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AD9102BCP?
QFN32, with 33 pins. Its footprint is drawn on this page.
What can replace the AD9102BCP?
Parts like it in the library: the AD7124-4BCP by Analog Devices, the ADF4355-2BCP by Analog Devices, the ADF5356BCP by Analog Devices and the XRP7713ILB-F by EXAR. Check their datasheets: a part that fits the footprint may still differ in its ratings.