Skip to the content
12345678

AD8429BR

Analog Devices

1nV/sqrt Hz Low Noise Instrumentation Amplifier

Part id
adi/AD8429BR
Category
Uncategorised
Package
SOIC8
Pins
8
Used on
6 open-source boards

Overview

The AD8429BR is an uncategorised made by Analog Devices in a SOIC8 package with 8 pins. 1nV/sqrt Hz Low Noise Instrumentation Amplifier.

PCBKit's library has its KiCad symbol (Amplifier_Instrumentation:AD8429, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6 open-source boards in 3 repositories on GitHub use it.

Symbol

1-2Rg3Rg4+5Vs-6Ref78Vs+
Amplifier_Instrumentation:AD8429From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AD8429BR
PinNameType
1-Input
2RgPassive
3RgPassive
4+Input
5Vs-Power in
6RefPassive
7—Output
8Vs+Power in

Open-source boards using it

6
  • 2 layersLIA, the printed circuit board in 3D

    LIA

    JasMoH/Photoacoustic

    Photoacoustic spectroscopy

    295 parts5GPL-3.0
  • 4 layers56.4 × 61 mmPreamp regulator, the printed circuit board in 3D

    Preamp regulator

    nacs-lab/yyc-data

    Both connectors (Camera link an the 2x30 connector to the breakout board) and the decoder chip are on the same (front) side of the board, which is the side that is closer to the FMC connector and the DDS power supply…

    90 parts2
  • 2 layers36.6 × 21.6 mmInst amp, the printed circuit board in 3D

    Inst amp

    JasMoH/Photoacoustic

    Photoacoustic spectroscopy

    53 parts5GPL-3.0
  • 2 layers70.4 × 35.3 mmLNA test, the printed circuit board in 3D

    LNA test

    JasMoH/Photoacoustic

    Photoacoustic spectroscopy

    113 parts5GPL-3.0
  • 4 layers56.4 × 20.3 mmPre amp, the printed circuit board in 3D

    Pre amp

    nacs-lab/yyc-data

    Both connectors (Camera link an the 2x30 connector to the breakout board) and the decoder chip are on the same (front) side of the board, which is the side that is closer to the FMC connector and the DDS power supply…

    28 parts2
  • 4 layers35 × 35 mmAD8429, the printed circuit board in 3D

    AD8429

    Michalek007/MastersThesis

    Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements

    38 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AD8429BR?

Yes. The symbol is Amplifier_Instrumentation:AD8429 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD8429BR?

SOIC8, with 8 pins. Its footprint is drawn on this page.

What can replace the AD8429BR?

Parts like it in the library: the LTA8062XS8/R8 by Linearin, the SD8568 by WAVE, the FH9926 by XIN FEI HONG and the LTC8836XS8/R8 by Linearin. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AD8429BR?

6 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.