4 layers100 × 50 mm
Differential Probe
imaginaryimpedance/Differential-Probe
Device is based on AD8130 differential amplifier and THS3491 amplifier on output stage.
197 parts1
AD8130ARM
Analog Devices
Lost Cost, 270MHz Differential Receiver Amplifier
- Part id
- adi/AD8130ARM
- Category
- Uncategorised
- Package
- MSOP8
- Pins
- 8
- Used on
- 2 open-source boards
Overview
The AD8130ARM is an uncategorised made by Analog Devices in a MSOP8 package with 8 pins. Lost Cost, 270MHz Differential Receiver Amplifier.
PCBKit's library has its KiCad symbol (Operational Amplifiers:Differential Amplifier Type2, from CERN's library) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | +IN | Input |
| 2 | -Vs | Power in |
| 3 | PD | Input |
| 4 | REF | Input |
| 5 | FB | Input |
| 6 | OUT | Output |
| 7 | +Vs | Power in |
| 8 | -IN | Input |
Open-source boards using it
2- 2 layers162.7 × 99.7 mm
SoilBoard
PavlinaMos/soil-moisture-sensor-thesis
The current status of my thesis including firmware, PCB design, writing
79 parts
Parts like it
8
TPC112S1-VR
MSOP-8-40℃~+125℃ 1 12 14us 2.7V~5.5V 2LSB 90uA Built-in External SPI、QSPI Voltage Buffer MSOP-8 Digital to Analog Converters (DAC) ROHS3PEAKUncategorisedCS48505AM
MSOP-8UncategorisedChipanalogCS48520AM
MSOP-8UncategorisedChipanalogOB2269MM/TR-HG
MSOP-8MSOP-8 AC-DC Controllers and Regulators ROHSHGSEMIUncategorisedLTS117-1-MW
MSOP-8-40℃~+85℃ MSOP-8 Analog to Digital Converters (ADC) ROHSLinearinUncategorisedBD87B29FVM-CTR
MSOP-8MSOP-8 Supervisor and Reset ICs ROHSROHM SemiconductorUncategorisedD4890
MSOP-8UncategorisedSilicoreXADC102S051-XC
MSOP-8-40℃~+85℃ 0.3LSB 1.6MHz~6.4MHz 2 2.7V~5.25V 400kHz 49.5dB 8 Built-in External Multiplexers No SAR SPI MSOP-8 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorised
Questions
Is there a KiCad symbol and footprint for the AD8130ARM?
Yes. The symbol is Operational Amplifiers:Differential Amplifier Type2 and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AD8130ARM?
MSOP8, with 8 pins. Its footprint is drawn on this page.
What can replace the AD8130ARM?
Parts like it in the library: the TPC112S1-VR by 3PEAK, the CS48505AM by Chipanalog, the CS48520AM by Chipanalog and the OB2269MM/TR-HG by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the AD8130ARM?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.